Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Epoxy and boiling water.

Posts

Epoxy and boiling water.

#1

Epoxy and boiling water.

Paul Kierstead

>I need a shallow long tray that can handle boiling water. My first thought was to build one of wood (on-hand), put some fiberglass cloth in it (on-hand) and coat with some West System Epoxy (on-hand). Seems nice and easy, gets the job done. However, looking at the epoxy specs, it would seem that boiling water would exceeds its limits. The question becomes, what happens? Does it just get a little soft (probably ok in my situation, it isn't structural), or does it start to break down (bad idea it would seem)?

Any experience or knowledge on the matter would be appreciated!

Re: Epoxy and boiling water.

#2

Re: Epoxy and boiling water.

Denis Ch�nard, Orl�ans, Ont.

>Years ago, someone published an article (I believe it was Frank Klausz) on building a box that could hold water without any sealant or glue. It was done using "wet-dry" construction, i.e. some parts were made dryer than the rest, the whole thing was put together, and pouring water in the box made some components swell and seal the box. Think wet-dry chair joint, � la John Alexander.

HTH,

DC

Re: Epoxy and boiling water.

#3

Re: Epoxy and boiling water.

Paul Kierstead

>Actually I considered that, but the problem with it is that the wood has to be kept wet to remain sealed. If it dries out it leaks for a bit when you put water in it, just like a barrel will. My application calls for pretty infrequent use. I do like the concept though; it has a certain elegance.

Re: Epoxy and boiling water.

#4

Re: Epoxy and boiling water.

Denis Ch�nard, Orl�ans, Ont.

>Maybe try it on a small scale, before committing to build a larger one?

I'd be curious to know how that comes out...

DC

Re: Epoxy and boiling water.

#5

JL

Re: Epoxy and boiling water.

JL

>I wouldn't use epoxy. I'd probably do a metal liner. You can get a piece of thick aluminum flashing. Build a form out pine that is similar in size to your piece. Use a peening tool and beat the aluminum into the depression. You'll probably have to take a torch to the aluminum to anneal it once it a while. I don't remember how much it work hardens.

I've seen metal liners for wooden trays/vessels in copper that were done that way. But we all know how expensive copper is nowadays.

Re: Epoxy and boiling water.

#6

Re: Epoxy and boiling water.

Keith Newton

>I think that the epoxy becomes soft, and while it is soft, will loose its strength from that respect.

What are you planning to use it for. Maybe you will get suggestion for another method.

Re: Epoxy and boiling water.

#7

Re: Epoxy and boiling water.

Paul Kierstead

>Hmmm ... some copper, shears and a torch I could probably make something up pretty easily, assuming I can improvise some kind of brake. Copper hammers well too I hear, so that is a possibility.

I don't mind springing for good materials; the cost of copper is acceptable to me. I think that is an excellent plan B (It would be plan A if I didn't have to go shop for copper...).

Re: Epoxy and boiling water.

#8

Well, here's an offer

Denis Ch�nard, Orl�ans, Ont.

>If you don't mind using aluminium, then I offer you to bring your stock over to my place, and I (we) would weld it together using my MIG welder. I also have a brake (30 or 36" capacity, I would have to check, never used it yet). That's as soon as I get an argon bottle for the MIG...

Let me know if that interests you, I could use some practice :-)

DC

Re: Epoxy and boiling water.

#9

J B Weld good to 500*F

john b. southwest Chicago burbs

>

Re: Epoxy and boiling water.

#10

Re: Epoxy and boiling water. *LINK*

Jim Dillon

>Paul,

You might snoop around the US Plastics site for something that would work. Here is a link to trays that are autoclavable. They also have trays for sterilizing instruments etc. Good luck.

Jim


Nalgene (TM) Autoclavable Trays

Re: Epoxy and boiling water.

#11

Re: Epoxy and boiling water.

Barry Irby

>Why don't you make a box and just drop a piece of polyethylene into it? A "soft" liner.

I saw a guy make a water proof box on Roy Underhill's Show, the WoodWright's Shop. He took a "side" board and used a nail or steel rod about an 1/8" in diameter. He laid the nail on the edge of the board and tamped it into the edge, creating a groove similar to a T&G joint by compacting or crushing the wood into itself. Then he jointed the edge about an 1/8" leaving it square, but with the compacted fibers driven into the edge. Then he assembled the box. Water seeping through would cause those fibers to expand more than the surrounding fibers and seal the box.

Re: Epoxy and boiling water.

#12

Many thanks!

Paul Kierstead

>Lots of good suggestions. Denis, I may take you up on that offer at some point.

I called West Systems and they said for my application it should work fine. So I am actually going to try that out since I have the materials and it is simple to do. If it doesn't work, I'll be trying out one of the suggestions...

Re: Epoxy and boiling water.

#13

Re: Epoxy and boiling water.

Mark Valsi

>I saw him make one, amazing !!!