Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

ideas for door and drawer pulls

Posts

ideas for door and drawer pulls

#1

ideas for door and drawer pulls

lee beeden

>I've almost finished a few cabinets for a kitchen and until now haven't put much thought in to the pulls. At first i thought about buying hardware, but the cabinets have such a clean look it would be nice to have no pulls of any kind.

These cabinets have no face frames and all the doors and drawers are close together.....I'm looking for inspiration..............ideas......imaginative ways of getting your fingers in between the doors and drawers. what solutions do you have?

Any photo's would be great!!!

Thanking you all in advance

Lee

Re: ideas for door and drawer pulls

#2

Re: ideas for door and drawer pulls

DB

>As I am designing my projects one of the things I do is determine how the drawers and doors are going to be opened. This is done before any wood is cut.

With out any pulls or handles to open the doors and drawers, one will need to put there hands (sometimes dirty and wet) directly onto the wood. his will make the cabinets dirty in no time.

If the doors and drawer faces are of the full overlay type then you can route a recess to use as a hand hold. If the doors and drawers are of the flush type there is not a lot of choices unless you want to cot a hand hold in the doors and drawers so that you can open them but then you lose all of your clean lines.

I guess you could design a hinge with an electric motor and have it radio controled.

Re: ideas for door and drawer pulls

#3

Re: ideas for door and drawer pulls

Dave Bair, Eaton Rapids, MI

>Get some of the rotating latches; the ones where you bump the door once and it jumps out a few inches, push it shut and the latch engages. Don't know how it'd work with drawers if they are heavily loaded.