Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

kiln dried wood

Posts

kiln dried wood

#1

kiln dried wood

susan

>Gentlemen,

I live in Boston but grew up in Nashville Tn. My family is originallyfrom

Columbia Tennessee.

I purchased a kiln dried fence from a very large fence company

Since the fence was installed in November.. the wood seems to be

peeling (not the paint). The fence company wants to sand down the

grain that is peeling and re-stain.. on site. What should I do?

The warranty is for a year so next year, they may not come out.

thanks for your help.

susan

Re: kiln dried wood

#2

Dale Lenz

Re: kiln dried wood

Dale Lenz

>Hi Susan,

Sounds like you are having growth ring seperation in the lumber, not sure. A pic, close shot, of your fence problem would do wonders.

Re: kiln dried wood

#3

Ellis Walentine

Read the fine print

Ellis Walentine

>From your description of the situation, I'd say you may be stuck with whatever remedy they are suggesting. If the growth rings are separating, which is common in flatsawn cypress, white cedar and other softwoods used for fencing, there's really nothing else to do besides sand and refinish, UNLESS you can get the company to replace all the boards that are flatsawn. The grain separation (due to moisture making its way through the paint or stain) is less noticeable on quartersawn or rift-sawn pieces. Read the fine print of your warranty and see if replacement is an option. Frankly, I can't imagine they will offer to select a particular kind of lumber to replace the offending pieces.

Hope this helps.

Ellis Walentine, Host