Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Knife handles.

Posts

Knife handles.

#1

Knife handles.

Basil

>My cousin makes knives. He sends off pieces of wood to have them "Stablizied", whatever that means. He tells me it's a 'pressure treatment' of some kind that hardens the wood and protects it from moisture and expansion. Pretty expensive thing to have done he says.

Now for the questions on a subject I know nothing about, P.E.G. or (I think) Poly-Ethyl-Glycol. I've heard it was used to 'stablize' wood. What is it called? Is it used to stabilize wood? Would it do the job he wants if he soaked knife handles in it? ....and where would a fellow find some?

Basil

Re: Knife handles.

#2

Re: Knife handles.

Barry Irby

>Basil, I am not sure, but I think these are two entirely different processes. PEG is sued to assist in drying wood by replacing the water and keeping the wood from shrinking and cracking. There is some evidence it interferes with finishing the wood. Since it has glycol in it's name I would question whether it is food safe. The blanks that are stabilized have some sort of plastic resin driven into them and then hardened so that the wood is impervious to moisture and the "finish" is within the wood.

It would be good to check ans see how hard it is to do the process and set up to do small pieces at home.

Re: Knife handles.

#3

JL

Re: Knife handles.

JL

>One of Hoadley's books describes the use of PEG (polyethylene glycol).

Basically it sort of replaces the water as well as "sucking" it out. There are a large number of Scientific suppliers and industrial suppliers for PEG. The trick is finding out what molecular weight range to use for your particular wood.

Another substance to consider (though more expensive) is one of the acrylics. Sort of use "super" glue to stabilize the wood.

Re: Knife handles.

#4

Re: Knife handles.

Lee Ohmart

>Polyethylene glycol is a substance we use in the pharmaceutical industry. It's a relatively non-toxic and non-absorbable substance. It's physical properties are a result of the number of ethylene units in the side chain and can range from a liquid to a solid. It has many pharmaceutical uses both internal and external. My guess is that the company offering stabilization would be using a low molecular weight PEG and using it to impregnate the wood which would displace water. Here's a link discussing this process.

www.fpl.fs.fed.us/documnts/fplrn/fplrn006.pdf

Re: Knife handles.

#5

Re: Knife handles.

John McGaw

>PEG treatment used to be used for knife scales but wasn't very good. The complaints I've heard were that it left the wood feeling "wrong". PEG stabilized turning blanks I've handled had a sort of greasy feel to them.

The current stabilization process for knife scales uses an acrylic polymer (probably catalyzed but I won't swear to it) which is forced to permeate the wood. My expectation is that the wood is placed in the liquid and a high vacuum applied over the solution effectively sucking out the air from the wood's interior and forcing moisture to flash to vapor. When atmospheric pressure is reapplied the liquid would be absorbed into the wood filling all the interior structure.

There is also supposed to be a process which involves radiation which I suppose is used to harden the polymer but I've not found any reliable information on that.

I've been harvesting some of my collection of exotic and not-so-exotic woods and donating the resawn bookmatched scale sets to an acquaintance who is apprenticed to a master knife maker. I figure that the small quantity of wood is of little consequence to me but having the right exotic wood to use on an "art" knife can make all the difference in the world.

Re: Knife handles.

#6

Re: Knife handles. *LINK*

Jim Dillon

>Basil,

Give this link a glance as it discusses a variety of recipes/ideas for stabilizing knife handles, woodturnings etc. As others have said, PEG is intended for a different application and may not permanently bond to the wood interior and thus leak back out giving the handle of the knife a slippery feel. I googled "acrylic wood stabilization" and there were a number of interesting hits. Good luck.

Jim


AAW Forum

Re: Knife handles.

#7

Re: Knife handles.

Philip Duffy

>Apples and oranges; one is soft and the stabilized wood for knife handles is permanently hard.

Re: Knife handles.

#8

Re: You've gone too far, Barry.

Al Stokka - Cambridge, Iowa

>Barry,

I know it's Monday and all but, you can't blame a guy can you? Especially went it jumps right off the screen...

You said, "PEG is sued to assist in drying wood..."

Now, I know Peg quite well and can assure you that (if you ask politely) she will help with drying wood anytime. Bear in mind that Peg knows next to nothing about drying wood but, that won't stop her helping. That's just the kind of gal she is. Alwats willing to lend a hand. I think you owe her an apology, in addition to court costs.

Heh heh,

Al