Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Top-O-The-Mornin' to ya.

20 Aug 2007

I hope this finds everyong doing well and are weathering the heat (if you are geographically located in any of the "warm" areas of the globe).

There's been zero shop time for me due to the day-job taking at least 60 hours a week and family taking the rest of the time. The LOML has had a death in the family and I've been franticly searching the internet for the cheapest tickets for flights as the funeral will be this Wednesday and we don't have time to get a car serviced, repaired, and made "travel ready" in time to make the 9.5 hour trip. So flying is our best choice....well, not financially, but with such short time it will have to be a good choice. I also found out that airlines do not do the "bereavement pricing" any more and haven't for sometime. Real shame in my book, but I guess that people abused it (kinda like sick leave at work) and they took it away. Oh well.

Been trying to find a 2' by 8' vacuum bag to do this blased veneer on the curved kitchen table. Aren't y'all tired of hearing me talk about this yet?? Joe Woodworker doesn't have any and won't be getting any until "maybe" October and I'm not sure about the hookups for bags coming from Quality-Vak, and Vacuum Pressing Systems are priced to high to even come close to competing with the other 2. Any ideas? Anyone got a vacuum bag that I can borrow for 2 uses on a 16" radius piece that is 4" wide? The curve is 180� and length of the curve is about 49". I can tell you that a 4' by 4' vacuum bag will not do the trick. Even if someone out there has a "laminating bag" that is 12-20" wide by at least 8feet long, I'd love to talk with you about using your vac-bag for making 2 pressings with it.

I ask this because I've lent out a few things to fellow WW'ers in the past, 1 as far away as Washington state, with very good success and reliability. So....why not ask the crew here? Right?

This will be an extremely busy week this week. The LOML and LOML Jr will be out of state for the family funeral until next week. I'll have the 3 boys to tend to as well as some very stressful situations at work, and the list goes on from there. It's as if "everything" in the world either starts or takes place "this week". Sheesh!!!!!

Any way......What did YOU do this weekend???

Best of weeks to you all.!!

Dennis Peacock

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

Mike Fitterling

>Dennis, hope things start looking up for you as the week progresses.

I finally am in the home stretch of that maple/walnut kitchen job. The very last thing I had to do was resize 13 pullout bins that I had originally made too wide and which hit the open doors when they were slid out. I was able to re-use all the lumber and got the joinery cut by the end of the week and got everything assembled and the box joints sanded flush on Sunday. All that's left to do is some finish sanding and a couple coats of lacquer and I can call the job done. The job started last October, so you can imagine how happy I am to see it coming to a close.

Mike, who is in an eerily silent house now that the kids are back in school.

Re: WC Weekend Accomplishments.....

#3

Weather - a little rain.

Dan Manturi

>Planned on digging 6 post holes for my new deck / sun room. Killed Saturday morning cause it said the whole weekend would be great. Well, here in Bethlehem, PA, we have a shovel substitute - it is called a shale bar cause you cannot stick a shovel in the ground here. started at Noon. 90 minutes to dig one hole 12" round and 36" deep. Got 2 feet into the next one after an hour and had to stop to take the wife to the movies. Sunday - Cloudy and rainy! Dug one more and tools too wet to hold.

So much for the weather.

Dan M.

Re: WC Weekend Accomplishments.....

#4

Put Out Engine Fire in #7 son's Car...

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dennis,

Charlie says hello from my lathe, where we are "creating" another bowl. Mondays seem to have evolved as our day for turning. That is a welcome respite from the flat work of the weekend. I milled miters is all the beading which will surround the door faces of the chest-on-chest, resawed enough 6/4 cherry for the faces, and ran then thru the planer down to 1/2 incgh thickness. That was enough. Otherwise, I rescued my son's car from destruction. they were swapping out an injector and there was an accumulation of gas in the manifold. There must have been abn arc from somewhere and the engine compartment erupted. Fortunately my Kidde extinguisher was close at hand, and we got the fire out before doing real damage. We keep a charged extinguisher on each floor as a safety precaution. Have a great week Dennis, and sorry to read about the death in your wife's family,. My condolences. May next week be better.

George

Re: WC Weekend Accomplishments.....

#5

Re: WC Weekend Accomplishments.....

Dave Arbuckle, Plano, TX

>I also found out that airlines do not do the "bereavement pricing" any more and haven't for sometime.

My wife's mom recently passed away. American Airlines gave bereavement tickets. They still weren't cheap, over $500 for a round trip from DFW to Ontario California, but that's a couple or so hundred off the regular price.

My condolences for your family's loss.

Re: WC Weekend Accomplishments.....

#6

Re: WC Weekend Accomplishments.....

Stephen Kirk in Quakertown PA

>I finished all the construction on a toolbox for the wife. She really like it. Now I just have some sanding and finishing, which may wait until the wet weather in Northeast PA is past.

I also managed to cut, split and stack 3 small trees worth of firewood before the rains hit on Sunday. I'm a little sore now, mostly from chainsawing close to the ground.

Unfortunately, I had to buy a new printer, so I went with a wireless model. Couple of minutes to set up the connection, but now it works like a charm. And no more cables.

I've been playing hard on my Xbox 360 to finish Marvel Ultimate Alliance before BioShock comes out tomorrow. After playing the demo for BioShock, I can say it is a phenomenal gaming experience, more like playing a novel. I'm sure it'll eat into the WW'ing time! I'll have to try to play only later at night when the shop lights are out.

Re: WC Weekend Accomplishments.....

#7

Re: WC Weekend Accomplishments.....

Dennis Yoder

>Hi Dennis, Very sorry about your families loss. I can relate to the rush airplane tickets. If the airline tickets add up to a Major new tool you might want to check into renting a car instead of repairs to your vehicle. Dennis Y

Re: WC Weekend Accomplishments.....

#8

Darrell in Oakville

Galoot BBQ

Darrell in Oakville

>On Saturday I hosted 3 local Galoots for the Nth Annual Galoot BBQ. We spent the afternoon down in the shop playing with hand tools and discussing wood, tools, tool making, knife making, &cetera. A very pleasant way to while away a Saturday afternoon. Then I fired up the grill and proceeded to burn dinner =:O A good time was had by all.

Sunday I was roughing out seat blanks for a set of Windsor side chairs. I rummaged around the shop and found almost 4 complete sets of legs and stretchers I had turned over the last few years as time and wood was available. Need to make another leg and a couple of side stretchers to finish off the sets. If I can just keep on top of this project we might have a new set of chairs by Christmas, eh?

Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User

Re: WC Weekend Accomplishments.....

#9

Re: Galoot BBQ

Jim Shaver - Oakville, Ontario

>Sorry I missed it Darrell,

I was teaching at LV and was super tired by the end of the day. If I had come over I might have fallen asleep in your driveway.

Take care,

Jim

Re: WC Weekend Accomplishments.....

#10

Re: WC Weekend Accomplishments.....

Al Stokka - Cambridge, Iowa

>Howdy Dennis,

A fellow poster (I usually record the info but, in this case I guess I was too lazy. Memory tells me it was Jim Shaver, but...) gave this info (I added some of my own regarding the adhesive. A search should lead you to his original post wherein you will find (again relying on my questionable memory) info about vacumm line connections, etc. Pictures too, as I recall.:

Vacuum Bag (Veneering)

20 mil vinyl

Adhesive

Fold roll-type vinyl double to form bag. Roughen edges of vinyl with 180 grit abrasive paper. Clean abraded area with acetone. Apply adhesive to roughened areas and allow to dry (about 20 minutes). Refold to form bag. Heat edges (where adhesive was applied) to activate adhesive and press with roller to form seal.

Adhesive: HELMIBOND 808 EMULSION ADHESIVE (waterborne)

Helmitin Inc.

USA:

11110 Airport Road

Olive Branch, MS 38654

Phone: 800.634.8761

Fax: 662.895.4583

Email:

usasales@helmitinadhesives.com

Canada:

Helmitin Inc.

99 Shorncliffe Road

Toronto, Ontario M8Z 5K7

Phone: 877.823.2624

Fax: 416.239.6487

Email:

cdnsales@helmitinadhesives.com

http://www.helmitinadhesives.com/water_frame.htm

HELMIBOND 808

EMULSION ADHESIVE

PRODUCT DESCRIPTION

Woodworking industry, when increased water resistance or heat resistance is required.

HELMIBOND 808 is also being used successfully to coat PVC edgebanding materials that are later applied by the iron-on or hot press method. HELMIBOND 808 also bonds porous facings and inserts to PVC laminated particleboard cores in the manufacture of furniture, drawers, kitchen cabinets, etc.

Other suggested uses are as a general purpose adhesive for bonding a wide range of porous and non-porous substrates, such as plastics and certain types of coated paper and leather for packaging, book-binding, shoe manufacturing and textiles.

Al