Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

flag display case plan

Posts

flag display case plan

#1

flag display case plan

Michael Paulson

>Hello to all,

I am looking for a plan to display the American Flag. I would have guessed these would be plentiful, but it appears not.

Any suggestions would be much appreciated.

My Dad's flag deserves my best.

Thank you,

Mike Paulson (log-head@msn.com)

Re: flag display case plan

#2

Bob Moffett

Re: flag display case plan

Bob Moffett

>There was one in Wood Magazine about a year or so ago. They might have it in their plans.

Re: flag display case plan

#3

Dale Lenz

Re: flag display case plan *LINK*

Dale Lenz

>Hi Michael,

I have built a few flag cases in the last several years, if I can help, I'll try. For starters see an early Shot Shot in the link below.

From my FAQ file is the dimensions of the flag cases I build.

Flag Case Dimensions are giving by width x height (bottom to top, not side measurements as many flag case business give) x depth.

The inside dimensions are the following: 21.5� x 11� x 3.25�

The outside dimensions are the following: 23.75� x 12.5� x 3.5�

I�ve been building flag cases since 1993 and have noticed a few things about the Veteran�s Memorial American flag due to customers coming to my home and asking me to put their Veteran�s flag in their flag case. As we all know the Veteran�s memorial flag is the same size, approximately 5�x9�, but the folded flag can be slightly different in size due to two of the following reasons:

� The weight of the material used in making the flag

� How the flag was folded, tight, lose or somewhere in between.

I have built 400+ flag cases over the years and have �tweaked� the flag case size to where all Veteran�s memorial flags have fit to this date. The flag may need to be refolded, but they all have fit, generally with out refolding. My flag case�s dimensions maybe slightly smaller then the measurement of your folded flag but once again I have learned that the flag displays much sharper in slightly tight quarters.

Lastly, my website: beautifulwoodworks.com

Hope this helps some. Dale


Flag Case Joints

Re: flag display case plan

#4

Take a look at these... *LINK*

Glenn Madsen near San Francisco

>See if this helps you. This is our club, and we're getting ready for another production run.

I made one of these for a friend's widow, when he died. The plans work pretty well, particularly in walnut.


http://www.diablowoodworkers.com/flagcases.html

Re: flag display case plan

#5

Re: flag display case plan

Mike Paulson

>Thank you to those who replied RE: flag display case.

It was very helpful.

Mike Paulson