Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Broken Rapid Action Vise

Posts

Broken Rapid Action Vise

#1

Broken Rapid Action Vise

Joe Burke

>It may be broken ..... I don't know.

It won't grab and tighten. As it begins to tighten it simply gives way and starts the process over again. I took it apart and nothing is obviously broken. The cast iron spilt nut underneath looks to be intact and the threads don't look that worn. But the second the threads start to exert pressure on the spilt nut it simply pops open. There's a metal spring clip that put pressure on the captured side of the spilt nut and I bent it to exert more pressure. No help.

This is a seldom used vice ... one brought in from my Dad's after he died.

I just hate for anything to not work without an obvious reason. What might this be? Have the ACME threads possibly become a bit sloped over time? I honestly can't recall having used the thing while it was working, and I can't remember much about it.

Re: Broken Rapid Action Vise

#2

Re: Broken Rapid Action Vise

Lee Schierer - McKean, PA

>I have a similar vise made by Reed Manufacturing, a local company here in Erie, PA. It has on occassion slipped. Most of the problem seems to be related to the split nut sticking slighly open. Check the nut for accumulation of sawdust or dirt and lubricate the nut pivots with a light machine oil.

Lee