What is this tool?
Max
>Anyone know?
Knowledge You Can Build On — Est. 1998
What is this tool?
Max
>Anyone know?
Re: What is this tool?
Jeffrey D. Rose
>Looks like it is a string winder. You can wind construction string around it and undwind it really easily on the job site.
Just my thought.
Jeff in Iowa.
Re: What is this tool?
Thomas Skaggs, Foothills of Mount Level
>I'm pretty sure it's a combination paint scraper and ping-pong paddle. And I defy anyone to challenge me! ;-)
Tom
Re: What is this tool?
Ernie Miller
>Play dough mold for Brio train tracks.
Re: What is this tool?
Max
>Doesn't look like the Play Doh mold.
Any ideas?
I challenge you
Tom Sontag - St. Louis
>to a ping pong match with paint scrapers!
I had a feeling you'd chime in!
Thomas Skaggs, Foothills of Mount Level
>How about paint scrapers at 10 paces? High noon? I'll be wearing my pearl handled scrapers of course.
Tommy The Kid
A watch band tool.
Max
>
Re: Piercing instrument.
Al Stokka - Cambridge, Iowa
>The handle (right side) has a threaded adjustment and the needle inside is spring loaded. Works like a pin ball shooter.
The narrow slot on the left is for ears and tongues. The wider slot on the right is for, er, uh, well, other body parts.
Al
Re: What is this tool?
Dave in Haverford PA
>Send it to "What is it?" on This Old House!
Re: Piercing instrument.
Bill White
>It is a Crinnix, and works in conjunction with a Frammus allowing folks like me to convert from RAS-only use to joint efficiency on both RAS and TS because with those devices, you can get the table surfaces to within .00000001" coplaner.
WHEWWWW! Now I have a headache.
Bill
Actually
Dan Donaldson
>It is for adjusting the muffler bearings on a Stanley #8.
Re: What is this tool?
Marv
>Are you sure it's a tool? Perhaps it's part of something else.
Marv
Actually, it's more commonly used
Mark Goodall - ATL - tooljunkie
>Actually, it's more commonly used to adjust the concentric timing vaccum on circuit boards used in micro-crystalized radio bearings whenever lead-acid second chains are problematic.
Happy Woodworking!
Re: Step right up and buy one *LINK*
Dale Lenz
>
Watch band tool
Re: What is this tool?
DB
>Kinda looks like a drill press vice. Could you post a larger picture? What is the size of the object?
Re: What is this tool?
Steve Schoene
>As said, a vice or clamp. Perhaps to hold cabinets together during installation?
Any fool can see..
Phileas But it appears Dale nailed it; it's a watch band tool. Phileas
>It's an alarm clock.