Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Wixey digital angle gauge

Posts

Wixey digital angle gauge

#1

Wixey digital angle gauge

john lucas

>I was just about to order one of these when I talked to 2 of my friends who bought them. Both had to send theirs back and get another one. Has anyone else had this problem. I don't want to spend $40 on a piece of junk but it looks like it would really solve some problems for me.

Re: Wixey digital angle gauge

#2

Re: Wixey digital angle gauge

loft guy

>Hi John,

I bought a Wixey a while back and have been very happy with it; no problems with accuracy.

I find it useful when its necessary to set up angles other than 45 or 90 degrees as those, IMHO, are easily set. Recently made a knife box that required 63 degrees and using the Wixey, the angles came out spot on.

From what I've heard, Wixey will very promptly replace any guages which don't perform accurately.

Bob

Re: Wixey digital angle gauge

#3

Re: Wixey digital angle gauge

Charles Yawn

>John, I've had mine for a few months and used it several times. No problems encountered in using it or its performance. Charles

Re: Wixey digital angle gauge

#4

Tilt Box *LINK*

Denis Ch�nard, Orl�ans, Ont.

>You should consider this one too, in a comparative review I read somewhere the Tilt Box was chosen over the Wixey (now I don't remember where that review is, of course...)

The first one I bought was recalled, its replacement works fine.

DC


Tilt Box

Re: Wixey digital angle gauge

#5

Re: Wixey digital angle gauge

Tony - Memphis

>I can't speak for their angle gauge, but the planer gauge I got from them has been a poor performer. I have not been happy with it at all and largely consider it a waste of my money. It eats batteries and is not very consistent. The concept was great though! I've been interested in the angle gauge, but hesitant based on previous experience. Maybe I'll try the TiltBox.

Oh, the folks at Wixley are very nice.

Tony

Re: Wixey digital angle gauge

#6

Re: Tilt Box

john lucas

>Thanks Dennis. I'll keep that in mind. I've been very satisfied with everything I've bought from Lee Valley so far.

Re: Wixey digital angle gauge

#7

Re: Wixey digital angle gauge

Tim Caley - North Little Rock

>I have one. Works great!

Re: Wixey digital angle gauge

#8

Re: Wixey digital angle gauge

Stuart Johnson

>No problems with mine. Money well spent.

Re: Wixey digital angle gauge

#9

Review from Sawmill Creek *LINK*

Bill Howatt

>Maybe this is the one you are thinking of, Denis?

Bill


Wixley TiltBox comparison

Re: Wixey digital angle gauge

#10

Yup! Thanks!

Denis Ch�nard, Orl�ans, Ont.

>

Re: Wixey digital angle gauge

#11

Re: Tilt Box ????

john b. southwest Chicago burbs

>The point of reference on the tilt box is on its side, to set the angle on a table saw the 'tilt box' has to be absolutely square. Is it. john b

Re: Wixey digital angle gauge

#12

Re: Tilt Box ????

Bill Howatt

>Very close but not perfect. It doesn't matter for the following reason: When you calibrate the device (such as after dropping it), you zero it; turn it 90*,zero again; turn another 90*, zero again; until you are back to the original side. Any box squareness error is zeroed out.

Bill

Re: Wixey digital angle gauge

#13

Re: Tilt Box

Phil Thien

>I have them both (don't ask) and I prefer the Wix.

Re: Wixey digital angle gauge

#14

Jim DeLaney, Austintown, Ohio

Re: Tilt Box

Jim DeLaney, Austintown, Ohio

>I also have both of them, and prefer the Wixey.

Both do the jobs they're designed for, but my Beall seems a bit overly sensitive, and has had to be recalibrated a couple times, whereas the Wixey just keeps plugging (accurately) along.

Jim D.

Re: Wixey digital angle gauge

#15

Re: Wixey digital angle gauge

Larry Marker in Alabama

>Did you buy one of the first ones? I did and was quite unhappy -- it ate batteries and would lose calibration if youlet the rod drop suddenly. I contacted the company and they told me they were redesigning the unit. They sent me a new one that fixed the lose calibration problem and then they sent me a second new gauge with one that was much more conservative in its battery usage. The one I have now works great and I have no issues. I appreciate a company that works that hard to make their product right.

I also have the angle guage and am quite happy with it.

Larry

Re: Wixey digital angle gauge

#16

Re: Wixey digital angle gauge

Larry Marker in Alabama

>I got one for Christmas and I am quite happy with it. I appears to be very accurate and very consistent.

Larry

Re: Wixey digital angle gauge

#17

Re: Wixey digital angle gauge

Bill Kay

>I have had one for some time now. Works great ... No Problems.

Re: Wixey digital angle gauge

#18

Re: Wixey digital angle gauge

James Fox

>Works as advertised, but I had to return the first one...kept giving inconsistent readings.

Re: Wixey digital angle gauge

#19

John, Aren't you glad......

Barry Irby

>you didn't get one of the early ones? Of either? My "old fuddy duddiness" is coming out. I now longer want to be the first kid on my block with the new toy. I want the other kids to try it out and get the bugs out. (MY BB gun came with goggles and I still have both my eyes, Red Rider) Sounds like which ever one you get now will be the second generation and that the beta testing may be over. Let us know how you like yours. (I don't have either, just thought I would be a curmudgeon.)

Re: Wixey digital angle gauge

#20

Re: Tilt Box

Bill Howatt

>Lee Valley sent me a letter saying that some of the Tilt-Boxes from their first shipment may have some quality issues that have now been corrected.

Supposed to check to see:

If the digital display is stable and provides a constant reading. If not supposed to recalibrate and put on a stable surface like a TS and see if the reading remains constant. They do caution it will respond to vibrations. They also advise you to let the unit sit a few seconds before pressing the buttons when beginning a setup.

Also check buttons press easily and the magnets on the side remain in place during use.

LV will provide a replacement if the unit doesn't perform properly.

Re: Wixey digital angle gauge

#21

Jim DeLaney, Austintown, Ohio

Re: Tilt Box

Jim DeLaney, Austintown, Ohio

>I have them both, too., and prefer the Wixey.

I wrote a comparision 'review' and posted it on Sawmill Creek a couple weeks ago - before they threw me off for criticizing an injustice to another member.

I don't know whether they deleted all my posts then, or not. If it's still there, it might help.

Jim D.

Re: Wixey digital angle gauge

#22

Re: John, Aren't you glad......

john lucas

>Barry I'm with you on that. I hate to be the test guy. My Boss has to have whatever is the latest software. So not only does he pay inflated prices, we also have to work through all the bugs and download fixes.

That may be why I like my handplanes so much. They've been beta tested for 200+ years and they work great.

Re: Wixey digital angle gauge

#23

Nice!

Ron in Drums PA

>Thanks for posting this John.

I just ordered the Beall

Now all I need is a digital protractor.

Anybody know of a good one?

Re: Wixey digital angle gauge

#24

Just Ordered 3

Mark Mandell - Gone Round In Jersey

>Bealls. 1 for me and two for friends.

mm