Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Candle adhesive - great stuff.

Posts

Candle adhesive - great stuff.

#1

Candle adhesive - great stuff.

Dan Manturi

>I was putting the outfeed table on my Unisaw and had a problem being in 2 places at once. Inside the saw and in back of the saw. The outfeed table had been assembled and removed, so I was not dealing with just the brackets, but the whole assembly that had been removed.

Long story short, I asked the wife to give me a hand, and they was afraid if something slipped, she would get a finger pinched. So I just thanked her and quit. She comes out 5 minutes later with a small can of "STICK-UM" Candle adhesive. Well, a little schmear of this stuff on the metal bracket and bolt head, pushed up into the saw against the back, held well enough for me to get outside in back of the thing, slip on a lockwasher, and start the 5/16th nuts. Thinner than FUNTACK, holds really well.

If you ever need a third hand and do not care about staining, this stuff is really helpful. I will be buying a couple of cans of this tuff and put them in the toolbox. Thanks to the wife Jane who made thsi work much easier.

Dan M.

Re: Candle adhesive - great stuff.

#2

Re: Candle adhesive - great stuff.

Larry Marker in Alabama

>Good clue -- I would never have thought of that.

If you can get the gun in there, hot melt glue works pretty well, too.

Larry