Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Heay duty fittings question?

Posts

Heay duty fittings question?

#1

JL

Heay duty fittings question?

JL

>John Lucas' post on effective ways to manage a planer got me to thinking. I've got a heavy planer which I currently store on a shelf underneath my workbench. As the planer is 90+ lbs, I don't always relish the idea of getting it out.

I sort of like the idea of a swiveling top that is plain on one side and has the planer on the other. I wouldn't mind having a real outfeed table for my tablesaw either.

So I can build a double sided top out of 3/4" plywood and use some 2 x 4 scraps for internal bracing. I can bolt the planer to the top and bed the bolts in the 2 x 4s. OK - what to use for the fittings to connect it to the base cabinet? I thought about sleeve bearings and 1/2" or 3/8" bolts. Any other thoughts? TIA.

Re: Heay duty fittings question?

#2

Re: Heay duty fittings question?

John Veerkamp

>Bronze Flange bushings are cheaper than bearings and would work just fine for this situation.

John

Re: Heay duty fittings question?

#3

Re: Heay duty fittings question?

Gary Evans Tallassee, TN

>Hi JL,

I built a murphy type bed long ago and used ball bearings set into wood blocks with 1/2" lag bolts as the axles

Gary

Re: Heay duty fittings question?

#4

JL

Re: Where to get them?

JL

>I only want a couple.

Re: Heay duty fittings question?

#5

Re: Where to get them?

Bruce, a MN Galoot

>any bearings supply place should have them. Something like this will work, too: http://www.bearingsupply.com/ or http://www.istate.com/ibt/

Or, you could try your hardware store, some place like Fastenal. They're really all over the place. I need some a bunch of years ago and found them at a hardware close-out / surplus store.

Bruce

Re: Heay duty fittings question?

#6

JL

Re: Thanks...

JL

>

Re: Heay duty fittings question?

#7

Re: Why do you need fittings/bearings?

Al Crandall (N.E. of Indy)

>It it were me, I'd just get a length of 3/4" or 1" black pipe from Lowe's and support each end in the main framework of the bench by cutting appropriate sized holes or vee notches. I would then box in around the pipe while I was building the internal supports for the planer. For your occasional rotation of the planer around the support pipe, a square hole will rotate as well as a round hole. If it turns out that the pipe is turning along with the planer support which surrounds it, that is O.K. also. The ends of the pipe can turn in their round wooden holes or vee notches for the two or three revolutions per month which this outfit is likely to experience. You don't need fittings. Keep it simple. (And inexpensive.)

Re: Heay duty fittings question?

#8

Re: Why do you need fittings/bearings?

Barry Irby

>I was wondering the same thing. How fast and how often you going to spin that planer? I think it could be measued in RPM. Revolutions per MONTH. It doesn't even require anything that could be called precision. Either the planer is right side up or upside down. You won't need a laser level to get it right.

Re: Heay duty fittings question?

#9

Re: Why do you need fittings/bearings?

Gary Evans Tallassee, TN

>Depending on the condition of JL's back, a bearing surface might make it easier to spin that sucker over. He did say it weighs 90 lbs. Of course, I guess you could add a removable turning bar to give you some extra leverage.

Gary

Re: Heay duty fittings question?

#10

Re: Heay duty fittings question?

Mickey Elam

>For a simple, CHEAP solution use 1/2" metal pipe (galvanized or black, doesn't matter); two 1/2" floor flanges; and a number of 3/4" ABS barb-type couplers. Use the couplers as bearing and epoxy them into the 2x4 cross members in your table top and run thhe 1/2" pipe through them; it just so happens that it's a good fit and the couplers self lubricate to some extent. Use the pipe flanges on the ends of the 1/2" pipe and mount them to the sides of your cart. This removes the possibility of the pipe slipping out of its mounting hole.