Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

99.8% Completed shop project. pic #1

Posts

99.8% Completed shop project. pic #1

#1

99.8% Completed shop project. pic #1

Eddie Pacheco, San Jose, Ca.

>We bought a used Multi-router in Feb. and about a month ago I decided it needed a stand of its own. Because of the limited storage space in our garage/shop and familyroom/shop I decided against buying the metal stand that JDS sells for this tool. I drew up the plans for a tapered or pyramid style stand and used wood that I had in our shop. The framework is red oak, the side panels and drawer fronts are leftover prefinished flooring material I had leftover from one of the rooms we refloored. It's not Brazilian cherry, but some other exotic that we bought. The door frames are Brazilian cherry flooring strips I got from a friend. I included a drawer and storage cabinet on both the front and back. The stand rides on 3" locking casters. After loading it with "stuff" this morning I noticed that I need to make some partitions or bins for the drawer I left as just a box.

As a side note; As I was focusing for the first picture, I noticed a gopher digging out in the back lawn. I put the camera down and got my pellet gun and shot the little varmint from the kitchen door. That pest has been digging our yard up for the past few weeks and the smoke bombs hadn't stopped it.


img

Re: 99.8% Completed shop project. pic #1

#2

Re: 99.8% Completed shop project. pic #2

Eddie Pacheco, San Jose, Ca.

>Here is a view of the drawer that contains the templates for the Multi-router. These came with the unit. The drawer rides on full extension slides. One of the screw ups here is that if you have a 12" drawer you need 13 or 14 inch slides to get full access to the contents. tomorrow I'll be driving to get 14" slides. Ooops!


img

Re: 99.8% Completed shop project. pic #1

#3

Re: 99.8% Completed shop project. pic #3

Eddie Pacheco, San Jose, Ca.

>Here is an inside view of the cabinet. I originally had triangular shaped doors, but I didn't like the way they opened up so I added the inserts and squared up the doors.


img

Re: 99.8% Completed shop project. pic #1

#4

Re: 99.8% Completed shop project. pic #4

Eddie Pacheco, San Jose, Ca.

>Here is the back view of the stand. Uh, notice the maple inset trim on the door panel? That was yesterday's screw-up when, in a hurry to finally wrap this up, I routed a panel recess on the FRONT side of each door. That ticked me off a fair amount to say the least. the neighbor's kids were playing next door so I couldn't use my normal vacabulary in a situation like this. That was also a bummer.

Sorry for the awkward camera angle.


img

Re: 99.8% Completed shop project. pic #1

#5

Re: 99.8% Completed shop project. pic #5

Eddie Pacheco, San Jose, Ca.

>Got side tracked on posting as my neighbor rang the doorbell and needed some lifting help.

Here's the side view showing the panel inserts. The frame is held together with mortise and floating tenons, which were cut with the multi-router. The finish is a clear waterbased polyurethane from Mohawk. The only parts I had to buy were the casters, slides, and hardware. Creating and working with this pyramid shape was fun and the Jessem Slide on my saw really came in handy when cutting the panels.


img

Re: 99.8% Completed shop project. pic #1

#6

Wow Eddie

George@Colonel's Workshop-Havertown PA

>That is a nice job on a nice tool,

You need to bring it over to my shop for a test drive lasting several years. Guaranteed my neighbor won't ring the door bell for some heavy lifting while you are here.

George

Re: 99.8% Completed shop project. pic #1

#7

JL

Re:Too pretty to be a shop cabinet!!

JL

>Really nice work.

Re: 99.8% Completed shop project. pic #1

#8

What--NO PICTURE OF THE MURDERED GOPHER?

Ken Oakley-Sunny St. Cloud, Fla.

>

Re: 99.8% Completed shop project. pic #1

#9

Re: What--NO PICTURE OF THE MURDERED GOPHER?

Thomas S Stockton

>Murderd is such a harse word. The truth is he hasn't had time to tie it down to the fender of his car to get a proper pic

Tom

Re: 99.8% Completed shop project. pic #1

#10

Dale Lenz

Re: Eddie just thought he murdered the gopher? 

Dale Lenz

>


img

Re: 99.8% Completed shop project. pic #1

#11

You guys..

Eddie Pacheco: San Jose, Ca.

>It was a clean gopher kill. Heck, I was pretty close. There is an open space and hill behind our house and I placed the DEAD gopher there for the night time critters to eat. The carcass was gone this morning. Once I left 2 squirrel bodies there and in the morning all that was left were 2 tails along with a pair of stomachs and intestines. I think an owl came in and left these two parts that interfere with flight and restrict payload. I guess, I don't know for sure. I do know that I don't want to be left in that field when my time comes.

Re: 99.8% Completed shop project. pic #1

#12

Thanks, George and JL.

Eddie Pacheco: San Jose, Ca.

>

Re: 99.8% Completed shop project. pic #1

#13

JL

Re: LOL - Rambo Gopher!

JL

>