Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Sealing deck board end grain

Posts

Sealing deck board end grain

#1

Bart Goldberg

Sealing deck board end grain

Bart Goldberg

>I'm visiting my brother's beach house in Fire Island and I noticed that most of the houses out here all suffer from deck board rot near the board ends. I suspect that no one is sealing the deck board end grain when replacing deck boards. I was wondering how effective Anchorseal would be for this application. Would it be able to last a long time, or would a shellac based product work better?

Thanks

Bart

Re: Sealing deck board end grain

#2

Re: Sealing deck board end grain

John in New Mexico

>I think anchorseal is your best bet, it lasts a lot better than I expected on Ipe of all things, but be warned, it'll probably look a bit different that whatever the rest is treated with (or if it isn't treated). Also, be careful not to drip it on the deck surface, as its pretty waxy and no other finish will penetrate or stick to areas that have anchorseal on them.

John

Re: Sealing deck board end grain

#3

Re: Sealing deck board end grain

Mark Mandell - Gone Round In Jersey

>Bart,

Anchorseal is WORTHLESS for your application because the wax contains an emulsifier to hold it in suspension. As the result, rain will simply wash it off because it "reimulsifies" in the rain water.

If you want to protect the end grain, you'll need to soak those ends in something like spar varnish or similar sealer thinned a bit to promote penetration, and made to resist UV and weathering.

mm

Re: Sealing deck board end grain

#4

Re: Sealing deck board end grain

Howard Norman-Prescott, AZ

>I have an Ipe deck that has Anchorseal on the ends for a year and a half. Has held up well.

Howard