Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

RE; to Trust or Not! that is the question?

Posts

RE; to Trust or Not! that is the question?

#1

RE; to Trust or Not! that is the question?

Dave Anderson (PacNW)

>Last week I posted to this message board regarding my frustration with magazine tool reviews and the quality control on a new Rikon 14" Deluxe bandsaw. I sent a copy of my post to Rikon customer service dept. I thought it was only fair Rikon have a chance to respond.

I received a personal phone call from the company Vice President. The phone call lasted about 40 minutes. The V.P. wanted to clarify the exact nature of the problems I had expirenced. After discussing the problems at length. I was left with the feeling that Rikon puts Quaity Control at the top of list. I know that a slip can occur in any product line, but it is the way that problems are handled is the true meassure of a company. The assurances that I received from Rikon about their commitment to a top quality product means, I will probably order another Rikon 14" Deluxe bandsaw from Woodcraft in Seattle next week. I am confident in the support will recieve from Rikon.

I will post again after I have set up the saw. I don't want anyone to have the impression I have been offered any monetary incentives. I will try to be very balanced in furture postings.

Again, Just 2 cents Worth,

Dave Anderson (PacNW

P.S. I just received an email from Rikon informing me that my problems with the bandsaw have been dicussed at lenght with ther Q.C. and enginering departments.

Re: RE; to Trust or Not! that is the question?

#2

JL

Re: RE; to Trust or Not! that is the question?

JL

>That's good to hear. I have one of their 18" bandsaws. I'm reasonably happy with it - my only complaint was they don't sell mobile bases for it.

Re: RE; to Trust or Not! that is the question?

#3

Re: RE; to Trust or Not! that is the question?

John Pappas

>Dave, Glad to hear this is working out for you. There is another story here. Too often we read posts where someone has a complaint and yet they have not contacted the manufacturer. I truly believe most companies try to do a good job, and we should award them the opportunity to respond to any complaint. When the company fails to respond then a post here serves as a heads-up about that company.

Likewise, praise should be sent to a company. Good to post favorable comments here for our benefit, but equally important that the company is complimented when they have done it right.

John

Re: RE; to Trust or Not! that is the question?

#4

Re: RE; to Trust or Not! that is the question?

GerryinSurrey formerly Agassiz previously Halfmoon

>I, too, am glad that you took the trouble to contact the manufacturer. If, as they say, take QC seriously then your next saw should be a dandy. If not, well, I'd certainly be looking for a different manufacturer.

Gerry

Re: RE; to Trust or Not! that is the question?

#5

Good to replace damaged goods

McKay

>I had an issue with the motor on my new Rikon and I talked to the Rikon guy at AWFS. I received a new motor and an apology. So, I also pleased with Cust. service.

Re: RE; to Trust or Not! that is the question?

#6

mirrors my experience with Jet

paul in AZ

>I had minor troubles with the fence on a new Jet 18" bandsaw. Without even going into the problem in depth they next day air shipped a new fence. A second call to ask a couple of questions and they sent yet another fence! No charge and they didn't want the other fences back.

I get so used to expecting crappy service [GE appliances top my current s*** list] that a positive experience with a company anxious to have a satisfied customer is a breath of fresh air.

I became a fan of Jet.