MDF raw edges
Newt
>Does anyone have a better idea for dressing the edges of MDF after routing a raised panel other than smearing drywall compound and painting with oil based paint? It works well but is time consuming.
Knowledge You Can Build On — Est. 1998
MDF raw edges
Newt
>Does anyone have a better idea for dressing the edges of MDF after routing a raised panel other than smearing drywall compound and painting with oil based paint? It works well but is time consuming.
Re: MDF raw edges
Michael Wangler in Rochester, NY
>I use diluted yellow glue. Mix about 1 part glue to 5 parts water and brush it on, and wipe off the excess before it dries. It works well, but not as crisp of a finish as drywall spackle. I use the this method for shelves and closet fixtures. Typically no sanding is needed after it dries.
Michael