Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Way off topic

Posts

Way off topic

#1

Way off topic

Bill Crommett

>I have an aluminum canoe that I am trying to rehab and sell. I wonder if anyone has had experience with any kind of polishing compound that will give an old canoe a new-like shine.

Re: Way off topic

#2

Mothers

Mark Goodall - ATL - tooljunkie

>Mother's Aluminum Polish

It will turn it into a MIRROR, no kidding. I'm using it on some old motorcycle's I'm restoring and I'm getting the aluminum as shiny as chrome.

Depending on the condition of the aluminum, you can get different polishing compunds, usually in the same place you get the Mother's Alumin Polish. Think of the procedure the same way sandpaper works on wood. Start with the coarsers stuff first and then work you way up to the polishing compound. In some places I actually used those nylon scrub pads as a coarse start at cleaning.

Or course, you must remember that aluminum looses it's shine quickly, and starts to turn a little dull within a week and within a few weeks/months it's really not as shiny anymore. It doesn't hold it's shiny as well as chrome. ANd water doesn't help either.

Since you're taling about a canoe which doesn't need to get as shiny as a mirror, and is a large surface, you probably won't want to work your way all the way up to the finest polishing compound. I'd get a few of the rubbing compounds and experiment to see how coarse you need to start and how much effort you want to put into it.

You can even try a little Coment or Ajax abrasive cleaner mixed with water. Careful ebcause the bleach in it might tarnish the aluminum, but I've used Coment and Ajax powder as a first step in polishing alot of alumimun parts.

Happy Woodworking!


img

Re: Way off topic

#3

I told you it's shiny *LINK*

Mark Goodall - ATL - tooljunkie

>Here is a picture of a bike very similar to mine (I don't have close up photos of mine yet, and mine aren't quite this good yet) but this guy shined up his aluminum engine case with Mother's Aluminum Polish. Pretty amazing!

If you like old Honda bikes like this, check out my website www.classichondabikes.com

Happy Woodworking!


img

www.classichondabikes.com

Re: Way off topic

#4

Re: I told you it's shiny

Bill Crommett

>Thanks, Mark. I have seen aluminum polished like new on an old Airsteam Trailer, but I never knew what the fellow did to get the shine. I guess I will start off with some Ajax and follow up with rubbing compound. I will let you know how the project unfolds.

Thanks for the experienced reply,

Bill