>Hi all A friend of mine is clearing a building lot in upstate NY. It is full of large size hornbeam, some 12-14" diameter.He says some has purple heartwood.He does not want to cut this wood up for firewood.Does anyone know of a market for this? Or possible uses?It would be a shame to waste it.Thanks for your help.
>the trees referred to as "ironwood" very hard. Genius name for bone like hard. Some wooden plane-makers have used the wood for plane soles. It should make a good "attention getter" also.
>I've been looking for good Hornbeam for a long time. I find it very hard to get a hold of in the midwest. If he could somehow move the trees to the upper midwest, I'd be interested.
Seriously though, if he ends up milling it up, I'd be interested in some of it. Keep me posted. Paul
>I was just reading Fine Woodworking's recent special issue about woodturning. The cover article is about the actor William H. Macy who is an hobbiest woodturner. To the point, he loves hop hornbeam, it is one of his favorite woods for wood turning.
>I would suggest finding a local sawmill, perferably portable so you don't have to move the logs, and get it cut into 2" and 3" planks. I think you could sell it reasonably easy. It is a lot of work to stack it correctly and move it around, but I enjoy working with wood.
>I concur with the above posts; I'd love to get my hands a few pieces. I understand that it can be hard to dry without degrade, so if you get that far, take all the usual precautions and dry carefully.
Be sure to wax-seal the cut ends, then put some up on Woodcentral's classified section. The Sawdust & Woodchips Woodworking Association and CNY Woodturners would be interested in some hop hornbeam. They're both in the Syracuse area.
I've turned it and, while it's hard to keep a sharp edge on my tools, it polishes up beautifully.
>This is a piece of hop hornbeam, about 1 1/2" in diameter, that I cut last year. When the sap is running, the bark can be stripped off in a single piece. I'll be taking down a 4-5" dia tree to make legs for a natural edge coffee table.