Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Gloat:: Just ordered Shelix Cutter for DJ-20

Posts

Gloat:: Just ordered Shelix Cutter for DJ-20

#1

Bart Goldberg

Gloat:: Just ordered Shelix Cutter for DJ-20

Bart Goldberg

>I just called up Byrd Tool today to place my order of a Shelix cutter-head for my Delta DJ-20. I've heard much about them, and my buddy Dave Pollak encouraged me to get it. Unfortunately there is a 2-4 week wait till it gets shipped. Has anyone done this retrofit on a DJ-20 that can offer any guidance?

Thanks

Bart

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

#2

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

Brian in Sandusky, OH

>Don't have one, but I'm going to get one someday when the pocketbook is a little thicker.

Please report back on the whole process of installation, performance, etc.

I've heard nothing but good things about these cutterheads...makes me think that jointers and planers with straight blades will be extinct someday.

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

#3

Yes I Did, *LINK*

Jim Shaver - Oakville, Ontario

>Hi,

I made the same upgrade for my General 480 after Chico told me about doing it on his DJ-20. It easily the best machine upgrade I have ever made to an already great machine.

The DJ 20 is an all above the bed replacement, unlike mine.

You're going to wish you had done this sooner, Did I mention how much I love mine

:-)

Take care,

Jim


My Upgrade

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

#4

What did it cost?

Mark Goodall - ATL - tooljunkie

>

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

#5

Re: What did it cost?

Jim Shaver - Oakville, Ontario

>Hi Mark,

I remember something like $450-475 US.

Take care,

Jim

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

#6

Bart Goldberg

$449. Plus shipping

Bart Goldberg

>

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

#7

Yes, there's no looking back.....at all.

HC Sakman

>It's quite simple procedure for DJ-20, really. My omly suggestion is to change your bearings while you're at it, regardless if they're ok.

Besides less noise, no tear out, I just revolved the first edges of each teeth after almost 2 years. I use nothing but nasty exotics (inc. very abrasive teak, wenge, rosewood etc...) and domestic hardwoods. I really love the durability. 18% tungsten HSS blades can't handle teak much.

Enjoy it.

Chico...

Re: Gloat:: Just ordered Shelix Cutter for DJ-20

#8

Just ordered one too...

Andrew F in Australia

>For the work I've got to do (sick of tearout, even with sharp blades)

The job two out is very figured Red Cedar - ever tried Jointing end grain in the middle of the face of the board.

Oh ... and the new neighbours (brand new house) might not like the noise from a thicknesser/jointer 20' from their new window.

Two problems solved - for a 12" non-stock SCM/MiniMax, I'm looking at four figures delivered here in USD - similar price to the USD 1400 ex works they quote for other European blades.

I'm hoping it lives up to its promises. I used one as a demo and it went well then.

Cheers,

Andrew