Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

OT. Glass Table Top Hardware

Posts

OT. Glass Table Top Hardware

#1

OT. Glass Table Top Hardware

Hal Langerud

>Hi all. My neighbor wants to convert a nautical statue to

a table by adding a 16" (or so) round table top. I've searched

and searched for the hardward necessary for this conversion:

a round device that is attached (apoxied?) to the table top and

screw mounted to the statue - which actually is wooden... It

may be called a "boss".

Any help will be appreciated.

Thanks, halinva

Re: OT. Glass Table Top Hardware

#2

My guess

Lee Schierer - McKean, PA

>I would guess that you won't find much available off the shelf and will need to make your own transition piece betweenteh statue and the glass. It should be fairly easy for a person with a lathe to make a round disk. Epoxy might work, or silicone sealant may be better to attach the glass to the disk. Silicone will take longer to cure.

If you can post a photo of the staue one of the woodturners could problably give you a design for the transition piece.

Lee

Re: OT. Glass Table Top Hardware

#3

Re: My guess

Hal Langerud

>Thanks, Lee. I'll pass this on to my neighbor (who doesn't have

a computer and can't do her own Googling). She will probably be

better off finding a ready made table top at one of the many

garage sales she attends.

Hal