Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

brad nailer

Posts

brad nailer

#1

brad nailer

nate

>I have Porter Cable bn200 that stopped working and I was wondering if anyone has had the same problem. I have had it for about 7 or 8 years and all of a sudden while putting in some trim for my father in law it just stopped. The hammer doesn't retact all the way back but I can slide it back with no problem manualy and then it will fire one nail and sticks again. I took it all apart hoping I would see something, no luck. Has anyone had this problem, and does one of the rebuild kits cure this???

Thanks'

Nate

Re: brad nailer

#2

Re: brad nailer

Barry Irby

>I have Senco guns so I really can't help, but I was wondering if you have been oiling the gun? I used to have mine set up on an air line oiler when I used them regularly, but now I just put a few drops (5)of oil in the fitting when I use them. Most of my problems have been oil related. Use the correct oil. Buy actual pneumatic tool oil.

If oiling doesn't do the trick the rebuild may be the answer. I have not rebuilt mine myself, I usually just take them to the shop when they need help. (I prefer to preserve the mystery of how they work).

Re: brad nailer

#3

Re: brad nailer

nate

>I do oil mine any time I use it with air tool oil and I have an eraser on the quick coupler end so that no dust gets in.

Re: brad nailer

#4

Re: brad nailer

Chuck Lenz

>Could it be the brand of nails your useing ?

Re: brad nailer

#5

Re: brad nailer

nate

>I have tried two different sizes that i have been using out of the same box i have had for a while. The hammer that strikes the nails doesn't retact all the way after firing. Thank you for the suggestion, but i think it is in the gun itself, just not sure what.

Thanks

Nate