Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Done at Last

Posts

Done at Last

#1

Done at Last

Jim O in Davenport IA

>Made a house warming gift for my son and his wife. Used spalted maple and Paduk. Finish is dye, 2 coats of oil, and 8 coats of wipe on poly. It looks pretty simple now that it is done. Wonder what took me so long?

I now have to pack it up and drive it to Florida. Any body know any woodworking, tools or wood related places to stop along the way? I'll be towing a trailer and would hate to come back empty.


img

Re: Done at Last

#2

Re: Done at Last 

Jim O in Davenport IA

>


img

Re: Done at Last

#3

Re: Done at Last 

Jim O in Davenport IA

>


img

Re: Done at Last

#4

Re: Done at Last 

Jim O in Davenport IA

>


img

Re: Done at Last

#5

Re: Done at Last 

Jim O in Davenport IA

>


img

Re: Done at Last

#6

Re: Done at Last

Ron Hildreth, Alta, Iowa

>Supperb Job, Jim! I really love the Spalted Maple!

Ron in Iowa

Re: Done at Last

#7

who cleans your shop?

Bill Tindall, E.TN

>do they make house calls?

Nice piece.

Re: Done at Last

#8

What's your destination and itinerary?

Rod Peterson -- Ormond Beach

>Unless you're going someplace in the panhandle, I suspect you'll probably take I-74 toward Champaign to pick up I-57, then at Marion, I-24 to Chattanooga, where you pick up I-75. That will plant you right into the spine of the state, and it's pretty easy to get anywhere from I-75. I've made that drive plenty of times when we were living in Chicagoland (well, not the DVN-PIA-BMI part—but when our son was going to ISU in Normal, we would often start out heading for BMI and then 74/57/24/75).

Anyway, tell us where in Florida you're headed, because it's a big state and places local to some of us aren't at all local to others.

Rod

Re: Done at Last

#9

No kidding! I had to hide the pictures,

Eddie Pacheco: San Jose, Ca.

>From my wife. If she saw that a woodworking shop could get or be that clean she'd have my hide.

Really nice bed frame and night stand, but I think some inner cleaniness issues Jim has that need to be addressed by a professional.

Re: Done at Last

#10

Re: What's your destination and itinerary?

Jim O in Davenport IA

>My son is in Lakeland, Fl, near Tampa. - you got the route pretty close.

Re: Done at Last

#11

Perfect!

Rod Peterson -- Ormond Beach

>One of the best (albeit pricy) hardwood suppliers in the state is in Lakeland. Hardwood Lumber & Millwork. They're on the south east side of town. Check Woodfinder using a zip of 33813 and you'll get all the particulars.

I noticed in my mapping program that the allegedly quickest route is to go down I-55 from BMI to near St. Louis, and then cut across a secondary road to pick up I-64 to I-57. In truth, it's only minutes faster (if that, and only 15 miles shorter) than the route I mentioned, plus mine is all interstate.

Have fun.

Rod

Re: Done at Last

#12

Ellis Walentine

I like the proportions

Ellis Walentine

>...and the wood selection is pretty wonderful, too.

Nice work, Don!

Ellis Walentine, Host

Re: Done at Last

#13

JL

Re: Done at Last

JL

>As you will be passing through Atlanta and Kennesaw, consider stopping at Peach State Lumber (http://www.peachstatelumber.com/home.html), Atlanta Wood Products (http://www.hardwoodweb.com/distribution/awpc.cfm) if you want lumber. For tools, you can always go by Highland Hardware for the "small" stuff or Redmond & Son (http://www.redmondmachinery.com/) for the big stuff.

No affiliation, just spent far too much money at all of them.

Re: Done at Last

#14

JL

Re: BTW, nice gift...

JL

>I'm sure they'll love them.

Re: Done at Last

#15

Well done indeed Jim........

Scott in Eastern Iowa

>....stunning wood that is.....was it purchased or milled locally?

They are lucky ....lucky indeed!!!

Scott

Re: Done at Last

#16

Re: Well done indeed Jim........

Jim O in Davenport IA

>Scott

Got the maple for the panels at Native Woods in Rock Island and the paduk and maple for all the rest at Builders world in Milan, IL.

Native wood mills their own stuff, hard to sort thru they have very little room and tons of inventory.

Not sure where BW gets theirs, but it is all laid out and easy to sort thru. They even carry exotics.

Re: Done at Last

#17

Re: Done at Last

Barry Irby

>I agree on Highland Hardware (the shrine of hardware stores in the south) and Atlanta Wood products. If you go to Atlanta Wood products, check out the "Backer boards". Its the piece left from the log after they slice the veneer. Premium logs, good stuff. (Not affiliated with either one and in fact, I am from Virginia and wish they were both closer to where I live. Just need to move NC and SC out of the way) Also, while in Atlanta eat at Mary Mack's. Good southern cooking. (Did I spell it right JL?)

Great looking pieces of furniture. Your son will be proud.

Re: Done at Last

#18

JL

Re: Mary Mac's (not Mack's)..

JL

>though one could argue about "good" - it is tasty. But "Platters of Fried Chicken Legs/Breasts, Country-Fried Steak & Gravy, Baked Chicken with Cornbread Dressing & Gravy" does nothing for your waistline.

Re: Done at Last

#19

You got to die of Something! It's worth it!

Barry Irby

>