>For anyone who's thought of conditioning their shop during the year's temperature extremes, I'd have to say this kid's a genius.
The links to additional pages are in white in the various blue background boxes strewn around the website. There's also a PDF defending the project to his professors.
>Clever young fellow. Looks like something I would have done. (Ask me about my fireplace heat recovery system and home made solar water heater.)
Actually, Air Conditioners do three things (cooling, dehumidification and filtering) and this concept ignores tow of them. This AC does not dehumidifier and dehumidification may be more important than cooling for comfort. The filtering might be important to keep the "system" clean and help prevent mold growth.
Also, depending on where the ice comes from, there could be a net loss with this system. If he makes the ice inside the same house with a freezer or refrigerator, that unit dumps the heat out of the water into the house as the water freezes. So, if you make ice and then dump it into the tub to cool the bedroom, the room where the freezer is gets hotter and hotter.
OTOH, If you bring the ice in form somewhere else, it might provide some net cooling. Neat to see people innovating.
>The rating of an air conditioner is often quoted in "tons". This is the equivalent cooling capacity of melting 1 ton of ice per hour. This was started in movie theaters and other building that were cooled by blowing air across huge blocks (tons) of ice. Thus the rating - As I remember, a ton is about 11,800 btu. My shop air is 2 1/2 ton - (30 X 30' story & 1/2) - I don't think a few hundred pounds of ice in a garbage can would do much good. Another issue is that the big benefit is the reduction of humidity when the air flows across the chilled evaporator coil - That what the stream of water flowing outside is from.