DC for RAS
Ron Hildreth, Alta, Iowa
>Scott from Eastern Iowa thought my RAS was a mitersaw station, probably due to my poor photography. So I got to thinking maybe others here would be interested in my solution to dust control for my Radial Arm Saw.
You'll notice two ports behind the saw head, but only one flexible hose leading out the top. I used a "Y" behind the homemade hood to join them, so that 45 degree to the left cuts could be made and still catch everything. This set up isn't 100% effective, but does a pretty good job of it. Material is 1/2' recycled plastic (think milk jugs) that I picked up at the local lumber yard. Both right and left wings fold down for easier operation of the mobile base the saw is on. The saw itself is circa 1952-62 Black & Decker/DeWalt.
Ron in Iowa





