The Fat Lady has Sung
Alan Young
>I delivered the end table last night and the client liked it. The color was good and she is happy. The client is 24 miles away and as I drove home I kept my cell phone at hand trusting that I would not hear it ring! :^)
When I got home I checked my e-mail and found this note: XXX is happy with the table. They look great with our new lamps and I think the wood really warms up the large room. Moved the metal table into the dinning room where fixtures, etc. are all trimmed in like metal. All is well that ends well--------------thanks for all your hard work. Sincerely,
Hi Alan,
XXX & XXXXXX
In summing up this project I guess I'd say Ellis's cometary is again DEAD ON. , It doesn't really matter how hard then job is or what the client wants-When you make a decision to take on a commission you must find a way to get the job done. I am sure I "lost" money on this job because of the mistakes I made and the extra time I spent repeating the finishing step,re-veneering, multiple delivery runs...on and and on it seems. I was ready to toss in the towel a couple of times but I knew the problem was mine -not the clients- not even the wood.
This project looked very simple and easy-In fact that's why I took it on- I already had two big project that I was working on but I thought-"These table are so simple I can knock these out in no-time"
I was party correct. I built them in two weekends time. But the finishing took me down.
Every so often we find ourselves in over or heads. I am grateful to Ellis and several folks here at WC for the lessons in toning the lacquer. It saved the job.
I have included Ellis's commentary from my post yesterday because it is important information for anyone contemplating commissioned work.
Alan
... maple is a great wood, able to be stained, dyed, glazed, finished, etc. without blotching, assuming correct procedures are used, so I don't think you can justifiably shift the blame to the choice of wood -- which is exactly how the client will take your claim. Better to admit that the finishing process got corrupted somehow and that you're there to give them what they want.
The way to have prevailed with your recommendation of anigre would have been to show them a sample of anigre finished exactly as you planned to deliver it to them. If they thought it was a good choice, they would have given you the green light and you could have done what you really wanted to do to begin with. But, it's also your job as the contractor to deliver a quality product regardless of the species they specify. Here again, this would have given you a chance to try to duplicate the look of their existing maple furniture. If you couldn't duplicate it, you probably should have found a finisher who could, or declined the project in that species.
The corollary to "the customer is always right" is that the customer most often doesn't have a clue as to what he/she's talking about or comprehending. You're the woodworker. It's your job to schmooze the customer and show them what their options really are: this wood, that finish, etc. Personal meetings and actual samples are so important to keep everyone on the same page. Bluelines and technical descriptions are worthless if the customer doesn't like the finished project. You may have the better argument in court or at an arbitration hearing, but that doesn't mean you'll get paid. It's best to keep the customer happy -- not at all costs, of course. :-)
Welcome to the school of hard knocks. I hope you win tonight.
Cheers, and, at worst, chalk it up to experience...
Ellis



