Counter height
mdclor
>What is the standard height for kitchen counters and bathroom counters?
TIA,
Merle
Knowledge You Can Build On — Est. 1998
Counter height
mdclor
>What is the standard height for kitchen counters and bathroom counters?
TIA,
Merle
Re: Counter height
John in New Mexico
>36" for kitchens, 30" for baths. I tend to build my own bath cabinets 36" or taller, not having children, and finding low sinks really annoying.
John
Re: Counter height
doug f, san clemente, ca
>John - my son and I just finished his new kitchen cabinets and the finished top (with Corian, 1" thick with supports) was at 39". He is 6' and finds the new height much easier on his back. "Standard" is becoming less and less "standard". Experiment with some cardboard boxes to see what feels right for you.
Have fun with your project.
Doug
Re: Counter height
sreeb
>My current house has an owner built kitchen. His wife was short and things like modern dishwashers don't quite fit. Something to consider if you want to go less than standard height.
Re: Counter height
Lee Schierer - McKean, PA
>Normal kitchen counters are 30" to the top. You can customize them, but as others have said, consider appliances and whether the house will be sold. The new owner may not appreciate the custom height and it may radically alter your selling price if the cabinets have to be replaced for height.
Lee
While some consider 36" to be standard
Don henthorn
>it is a lot like saying what height a work bench should be. I think it depends upon the situation and who will be using them. My wife is 5' 2" and 36" is too high to be comfortable. When I built her cabinets I made them 34". Of course, as been mentioned, the height of the appliances will have some bearing, but what rule says that all the cabinets have to be the same height. If you have a choice, make them for the person who will be using them.
Are you sure?
Ted Wong
>At 30" to the top of the counter I think it'd be really hard to find a typical dishwasher to fit under. Not to mention your cabinets would only have about 24" in height given a typical 4" toespace and 1 1/2" thick countertop. And after getting a sink in the clearance underneath might be difficult for plumbing.
Clarification...
John in New Mexico
>When I said "standard" heights I'm basing that on factory cabinets that I've either installed or lived with. Aside from the height of kitchen appliances (around 34" to 34 1/2" in my experience), there's no reason not to build them any height you find comfortable.
Re: Counter height *LINK*
Steven Pollack
>All the bathroom vanities we import from overseas are consistently 33"-34".
Steve
Bathroom Vanities
Re: Counter height
Barry Irby
>A friend and I earned our way through college building cabinets. Kitchen cabinets are usually 36" tall and vanities 30 to 32".
36 inches is too tall for most people, but as mentioned by others, common appliances like dishwashers will need about 34 to 34 1/2" under the countertop. Some ranges will also need about the same height.
To tell what height would be comfortable, walk up to a table, stand comfortably and let your arms hang. Your knuckles should gently rest on the table without your shoulders being hunched. The idea is that if you were to work on this surface, say mixing something in a bowl, you could support the bowl with one hand and mix with the other without have to either stoop or bunch your shoulders or stand like you have chicken wings. For most people between 5' 2" and 5' 8" this is closer to table height (29 to 30") than 36".
Cooking styles have changed and "modern" cooking may not involve quite so much hand mixing etc. Also, cooks may have gotten taller, both because women may have gained a little in average height and because men like to cook too. (trying to be PC or diplomatic here, or I could just say "get in that kitchen and rattle them pots and pans.")
At 30 to 32" inches, vanities were about right for many. Try standing in front of it and bending from the waist and letting your face come down into the bowl. If it is too tall it is difficult to do without bad posture.
So, what it amounts to is that kitchen counters have traditionally been too tall for good ergonomic food prep and vanities have been about right. Now, As a Home Inspector I see people raising both. Kitchen cabinets at about 40" and vanities at 36". I sincerely doubt they are better for most people, but having made the decision I doubt they will admit the error.
An aside: if you are right handed, the dishwasher should be to the left of the sink. Generally, you hold it in your left hand, clean it off with your right and place it in the DW with the left.
This may be "colored" by the fact that I am 5'8" tall. If I were 6'2" or 6"4" tall I might argue the 36" CT's are about right or a tad low. It depends on how tall the cook is.
Try looking up something like "ergonomic kitchen design."
A 6'0"-er's take...
Jason Roehl in Mulberry, IN
>I think 36" is too short. Why? Because of sink height. I absolutely cannot do dishes in a sink without back pain because of how I have to stand to reach the bottom of the sink. I have seen cabinets that are somewhat recessed under the sink which gives room for knees, so those might work better for me, but I would much more comfortable with 40" countertops for sure. But, hey, my wife does most of the work in the kitchen, and our new-to-us place has a dishwasher, so it's pretty much a moot point for me.
Jason
Re: Counter height
Jim Dillon
>Merle,
I'm 6'2" tall and my wife is 5'8" so when we built our kitchen cabinets we made the sink side 38 inches tall (including the countertop) and the "food-prep" side 40 inches tall (it is a smallish galley-style kitchen) and that has worked well for us. The downside is that appliances are designed for shorter cabinets (36 inches, I think). So, for both the stove and the dishwasher I built a plywood platform to elevate them. I encorporated a "handle" on both to make it easier to pull out if needed. Having the dishwasher on the left side has worked well too. Good luck.
Jim
Re: Counter height
Bill White
>Our company is a kitchen/bath design and sales enterprise. That does not mean that we have all the answers, but kitchen base cabs are 34 1/2" tall plus countertops. Depending on the type of top, most end up at 36" finished height. Most all vanities today are being built at the same height as kitchens. We find folks are tired of standing on their heads to brush their teeth.
Build 'em any way you like, but look at all std. build-outs and you will find these dims to be correct.
As was said, ya gotta be able to fit in appliances. Check 'em out.
Desk heights finish out a 30" including tops.
Bill
Re: Counter height
Bill White
>Forgot to mention that many folks are opting for a raised dishwasher or base mounted microwave. We have such a display in the showroom, and it is WELL received.
Bill
Raised dishwasher
Carlos Clarke
>I'm remodeling my kitchen and my wife wants the dishwasher raised.
What does the platform under the dishwasher look like?
And how do you slide the dishwasher in/out for maintenance?
How high do people raise the dishwasher?
She wants it raised 12 inches.
Oops
Lee Schierer - McKean, PA
>My post should have said 36", but the rest of the comments are correct!
Lee
Re: Raised dishwasher
Bill White
>We raise the DW 6" so it will equal the base height for a step-up bar. That way it will finish out at 42".
We have a false front above the toe kick. Looks like a drawer front.
Bill
Re: Deeper sink designs
Glenn Madsen near San Francisco
>Take your cabinet height, and drop a deeper sink in it, and you have to reach further down. All the more reason to raise it up.
One of the fellows on another board builds custom height kitchens. He RAISES the dishwasher up, not unlike a wall oven, in an appropriate cabinet. Less bending over to load and unload.
When you're doing a custom kitchen, it is for one family. Anyone else wants one, then they have to make their decisions.
Re: Raised dishwasher
Jim Dillon
>Carlos,
Although your question wasn't directed specifically to me, I'll take a crack at it. Building the platform is the easy part. I made the part the appliance sits on from 3/4 inch birch plywood to insure flatness. I actually made a frame about 4 inches wide (biscuits at the corners) to insure that the legs of the appliance will fit on the frame. I also made the "legs" from the same material turned on edge and carfully cut to the right height. I routed a "handle" on the end facing the outside to allow easier removal. The appliance slides in and out easily, in fact I had the dishwasher in and out this morning for repair (a whole other story!). I have a 4 inch high removable toe-kick that makes it easy to access the platform. I suppose you could make it any height and cover the raised platform with a false drawer front as suggested - or maybe even a real drawer if you are thinking about raising it 12 inches. Hope this helps.
Jim
Re: Counter height
Jim Dillon
>Merle,
Another reason that 36 inch high kitchen cabinets is the "standard" MIGHT be that this dimension makes VERY efficient use of a standard 4 x 8 sheet of veneered plywood. I read somewhere that one large manufacturer of kitchen cabinets turns out 10,000 cabinets PER DAY. Needless to say, at this volume level, any waste is a major concern. Nonstandard cabinet heights makes less efficient use of the plywood which is why it is less common (and more expensive). Food for thought.
Jim
Re: Raised dishwasher
Carlos Clarke
>Appreciate the responses.
If you have pictures that would help.
Thanks,
Carlos
Thanks for the great input!
mdclor
>
Here you go...
Jim Dillon
>... dust bunnies, mouse droppings (why do we have 3 cats?) and all. If you are thinking about raising the appliance 12 inches, it would be easy to add a set of drawer slides to these legs, add a nice drawer front and you've gained some storage space. Good luck.
Jim
Re: Here you go...
Carlos Clarke
>Thanks,
That's easier than I thought.
Re: Raised dishwasher
Lee Gordon
>If you decide to install your dishwasher on a raised platform, you might consider building a second platform at the same time. This one would be be the same size but free-standing. If you ever need to service the dishwasher, you would place the free-standing platform in front of the unit and slide the dishwasher onto it, keeping it level as you do your maintenance or repair.
I imagine you could use such a platform as a step-stool in the kitchen, although something with the footprint of a full size dishwasher may be a bit unwieldy. Perhaps you could cut it in half to make two foot stools and then slide them together if you ever need to use them as repair platforms.