Euro-style sliding table saws
Andy Lincoln,In Dearborn MI
>Hi All,
The shop where I make most of my yearly income has purchased and installed a Format 4 sliding table saw.Most of us at the shop have very little experience with this type of saw.I am in the process of contacting Felder/Format on getting a couple DVD's they have on their saws,one of which stars Frank Klausz.I am trying to educate myself on the proper usage of these types of saws and have a head start into the season.Currently I am not working there and do not have daily access to learn via trial and error.I own The TableSaw Book By Kelly Mehler and have read the latest article in PWW,but looking for more of a how to than why type info.I should add that the vast majority of our work will be sheet goods and not lumber.I am skeptical(for lack of a better word) of the saw because the crosscut fence is forward of the blade,you are pushing the material to the fence and then trhu the blade,potentially fighting the blade pulling/pushing the material away from the blade. Also there is a bar that is attached to the sliding mechanism that "traps" a worker between the sheet good to be cut and the end of the slider.It just doesn't seem right to me but wanted some advice/tips/etc. before dismissing the potential of the saw.I MAY be able to get some pics within a week or two to maybe further explain my thoughts.
Thanks,
Andy



