Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Finish for QS Sycamore?

Posts

Finish for QS Sycamore?

#1

Finish for QS Sycamore?

Scott in Douglassville, PA

>Hi, all -

I'm finally closing in on the end of a project I started over five years ago - a chest of drawers for my daughter. Was meant to be a changing table, too. Oh, well. Anyway, the drawer fronts are quartersawn sycamore, and I'm huntin' a finish for 'em. Waterlox? Shellac? What'll bring out the ray grain? Does oil yellow the sycamore?

Thanks; pictures forthcoming...

Scott

Re: Finish for QS Sycamore?

#2

Re: Finish for QS Sycamore?

Jim Dillon

>Scott,

While I have no experience with QS sycamore, I have used an oil/varnish mix on spalted sycamore and found that it does indeed yellow the wood. While I like the look, it for sure alters the nice cream color of the original wood. A coat of blond shellac as the first coat helps out quite a bit to lighten the final look, but there is still some yellowing when the shellac is followed by an oil/varnish final coat - at least in my experience. Others may offer alternative solutions to your question. Good luck.

Jim

Re: Finish for QS Sycamore?

#3

Re: Finish for QS Sycamore?

Scott in Douglassville, PA

>Thanks, Jim.

I've got a scrap being finished with waterborne poly and dewaxed shellac right now. The two look comparable. But you know the wife'll have the final say anyway... ;^)

Re: Finish for QS Sycamore?

#4

Re: Finish for QS Sycamore?

Jim Dillon

>Scott,

My wife, bless her heart, has been telling me daily for the past ten years that I am getting senile. Well, my post to you is the nail in the coffin I'm afraid. For whatever reason, I completely forgot that I had built some drawer sides from QS sycamore and here is a pic to prove it 8-). The finish was an oil/varnish (Tried and True) and turned the boards a yellow/amber(?) typical for an oil finish on other woods. Portions of the wood turned darker than others. On another project, three coats of blond shellac on flatsawn sycamore turned out somewhat lighter. My apologies for my misstatement in the original post. Got to start taking those "memory pills" I guess.

Jim


img