Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Possible New Shop!

Posts

Possible New Shop!

#1

Possible New Shop!

Ron Hildreth, Alta, Iowa

>I've been busy making an offer on a new shop building located on Main St in the small town I live in. Made an offer this morning, and if all goes right, will have the shop of my immediate dreams. Building measures 25' X 90', three walls insulated block and front wall insulated wood frame. You can drive straight through this building from main street to the alley, as the front 8'x7' overhead door is still behind and above the window to the right of the walk-in door in the photo below. This place has a new rubber roof, new 200 watt service panel and wiring (all for 110v), new furnace (still in the box sitting next to the still operating old one) a bathroom and a small office.

The only alterations that I would want to eventually do would be to build a finishing room, install many more lights (back half inside has nearly no lighting), and do a little painting both inside and out. Hope to find out more about it in the next week or so.

Ron in Iowa


img

Re: Possible New Shop!

#2

Re: Possible New Shop!

Ron Hildreth, Alta, Iowa

>Different angle


img

Re: Possible New Shop!

#3

Re: Possible New Shop!

Ron Hildreth, Alta, Iowa

>Rear of building at alley


img

Re: Possible New Shop!

#4

Ron - Very Impressive Facility

Howard In Toronto

>I wish you the best in persuing this goal.

Howard Rosenberg

Re: Possible New Shop!

#5

Any zoning

Bartee (metro Atlanta)

>problems ?

I have read several threads of guys who have found something only to be smashed by the zoning cops.

3 Phase power ?

What kind of work do you do ?

Keep us posted and thanks for the pictures.

Re: Possible New Shop!

#6

Re: Any zoning *LINK*

Ron Hildreth, Alta, Iowa

>Hello, Bartee,

To answer your questions,

No zoning problems, as it's nestled between a plumbing service center and a house that shouldn't even be there (only one in the business district of Main St.- Grandfathered in, I think) Checked with the locals (City Hall across the street), and according to them, I'm good to go. I did all of this before making my offer, along with other things I wanted to make sure of.

3 Phase electrical will be a breeze to install when I want. Upgrade will be pretty straight forward, as no paneling back in the shop area and conduits for all the wires is exposed and easily accessible. Service panel is 200amp and new, with only four circuits being used.

I do custom cabinetry, furniture and specialty on a part time basis as of now, as I still work ful time for the State.

I'm hoping to take early retirement and work at it full time within the next year, so this is a step toward that direction.


RK Woodworking

Re: Possible New Shop!

#7

All you need....

Clint Searl, at the base of Haycock Mtn

>is a bed, fridge, and microwave. Good luck; it sounds great.

Clint

Re: Possible New Shop!

#8

Gonna try it again eh Ron?

Scott in Eastern Iowa

>This aint thru the same fella you dealt with last time is it? If I recall correctly, it went from a great deal to the neighbor fella wanting to borrow all your tools and then to "whoa Nelly" in a few days right?

Anyways...hope it all works out this time....aint it a great feeling to see a dream happen?

GOOD LUCK !

Re: Possible New Shop!

#9

Re: The only alterations?

Chuck Lenz

>I think you mean the only alterations you can think of right now. lol. Hope it works out for you.

Re: Possible New Shop!

#10

Re: Gonna try it again eh Ron?

Ron Hildreth, Alta, Iowa

>Hi, Scott!

Been awhile since talk'in to ya!

Nope, never gave up looking for a place. I've out grew the basement a long time ago, so always been looking. I'll be in this building all by myself. As a joke I considered asking that guy if he wanted to share my building with me, telling him "cause you got tools I need!". but decided against it. Be just my luck he'd take me up on the offer and turn the tables!

Anywho--might end up becoming another pipe dream, but hope not. Everything is looking pretty promising this time, so got the fingers and toes crossed. I offered him 16k for it and it put a smile on his face even though he tried to suppress it.

Ron in Iowa

Re: Possible New Shop!

#11

Re: Any zoning

Bartee (metro Atlanta)

>Great.

I would love to be where you are. I'm 59 and hope that by 65 I can make some money making furniture.

I'ts a dream for me.

Looks like you will be actually doing that!!

Good luck.. more pictures once you get moved in.

Re: Possible New Shop!

#12

Re: Ain't that the truth!!

Ron Hildreth, Alta, Iowa

>Clint mentioned that I need a bed, fridge and microwave. Yup, not a bad idea, just in case the LOML kicks me out of the house!

Ron in Iowa

Re: Possible New Shop!

#13

Re: Ain't that the truth!!

Paul Woolson

>Ron, where is IA is that? Although it looks like just about every main street, it reminds me a lot of home, Clarinda in the SW corner.

Hope the new shop works out for you.

Re: Possible New Shop!

#14

Possible New Shop!

Gordie Anderson

>Would you possibly be the Ron that I sold soybean soybeans to?? When I was back in Iowa? My name is Gordie Anderson and I worked for Latham seeds. I know from the pictures must be in a small town in Iowa. I couldn't read what it said on the front to your building. Possibly Alta Iowa . Thank you, Gordie

Re: Possible New Shop!

#15

Re: Possible New Shop!

Ron Hildreth, Alta, Iowa

>Nope, Gordie, Not me! I'll buy hardwood, tools, and Harleys, but never soybeans. Of coarse I probably should have, the way the markets been lately.

Ron in Alta, Iowa

Re: Possible New Shop!

#16

Did you just type

CaliJeff

>that your offer was 16k for that? Granted my perspective on real estate prices is skewed by location, but how could one NOT have a shop space like that at that price? Color me jealous.

BTW is that projected savings from not buying smokes? : )

Re: Possible New Shop!

#17

Re: Did you just type

Ron Hildreth, Alta, Iowa

>I've saved a lot of money by no longer smoking, but not near enough to pay for this building! It does help though!

Commercial real estate here in town has really taken a nose dive over the past few years, and nearly any building on Main St. can be had pretty reasonable. Main St. business dist. is only three blocks long. Like any real estate, you gotta keep in mind what it's going to cost to fix it if in disrepair, or to renovate to make it meet your needs, and factor that into the bottom line. The present owner doesn't want to move out for maybe another year after selling, which is fine with me. Theres very little that I'm going to have to do to get up and running once I move in, so I'm willing to wait.

Ron in Iowa

Re: Possible New Shop!

#18

Re: Did you just type

Bart Leetch

>You know this but it is worth repeating.

Have the current owner sign a lease so you have your self covered.

Re: Possible New Shop!

#19

Re: Did you just type

CaliJeff

>I think it's great. I was talking to my wife about this and she said if all my stuff went away for 16K she would sign the check herself. Should I be worried? :)

Congrats and enjoy it.