Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Shaker Step Stool

Posts

Shaker Step Stool

#1

Shaker Step Stool

Jim Shaver - Oakville, Ontario

>Hi,

As in many wood working projects, we often combine a number of known skills with a few new ones to add to the satisfaction of the completed project. This project was more for practicing hand cut dove tails for a coming project so it served as a warm up since it�s been almost a year since I last cut dove tails.

I looked for a project in that light, to let me make the joinery and get the process reestablished in my hands. I found just what I needed in a book by Norm Abrams, Mostly Shaker. I have had this book now for about 8 years and this is the third project I have made with its guidance, a really well done book.

I chose the step stool project as a gift for my daughter, Dana is now going on 11 and needs a stool to get up to her clothes in her closet. How she has more clothes than anyone else I know amazes me.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

The project is made in cherry and is really quite simple, not an advanced project at all really. In the description of the plans Norm uses a jig to make his dovetails, I decided that this project would be as much focused on the dove tails as it would also be using hand tools.

Photo Sharing and Video Hosting at Photobucket

I also kept some notes, following a theory that Chris Schwarz describes as Course, Medium, Fine.

Photo Sharing and Video Hosting at Photobucket

For my Course work I did use the following tools: Jointer, Planner, Table Saw and Bandsaw.

Medium work used, chisels, coping saw, hand saws, block planes and spoke shaves.

Fine work used a smoothing plane and a hand scraper and some 220 sandpaper for some lights sanding.

Photo Sharing and Video Hosting at Photobucket

It took me three days to make this, it will take another two days of applying Danish oil to complete the project.

Some times it�s very useful to make a project like this to tune up on a skill in preparation for something bigger.

Take care,

Jim

Re: Shaker Step Stool

#2

Cool Stool

George@Colonel's Workshop-Havertown PA

>Good Afternoon Jim,

That is a lovely little stool. I bet Dana thinks its cool as well. She will bless you for it long after she outgrows its use in the closet. They are very practical in every household. As usual, the dovetails are perfect. I firmly believe it was you who taught Norm how not to make mistakes :<)

George

Re: Shaker Step Stool

#3

Very nice joinery

Clint Searl, at the base of Haycock Mtn

>

Re: Shaker Step Stool

#4

Way to go Jim!!

MN deepwoods (Dave)

>Dana has such a cool dad to make her a step stool like that. I hope someday I can cut DT's like you. I've made 2 of Norm's adirondac chairs. His books are great. But it still takes skill bring it from the page to reality. Thanks for the inspiration!

Regards,

DWD

Re: Shaker Step Stool

#5

Simply Beautiful

Jennifer@Indy.USA

>Jim this is one of those projects that served multiple purposes. You got to hone several of your hand tool and dovetail cutting skills, and Dana will be rewarded with this incredibly beautiful heirloom. I'm pretty sure she'll treasure it for many years to come. The Shaker designs have such a wonderful simplicity to them and you have really captured this with this project. The cherry was the perfect choice. Dana will have her arms wrapped around you for this one!

Nice job Dad :)

Jen

Re: Shaker Step Stool

#6

Ellis Walentine

Talk about solid!

Ellis Walentine

>Um, Jim, with a stool this sturdy, Dana will be able to hoist a backhoe into her closet. I'm with you on structural integrity, though, big guy, and look at all the good practice you got for casework dovetails. Hmmm, soon she'll need a fancy cabinet for her plasma TV. :-)

Superb work as usual, Jim. Thanks for posting it.

Ellis

Re: Shaker Step Stool

#7

Nice work Jim!

Denis Ch�nard, Orl�ans, Ont.

>Sooo, what's the big upcoming project? Inquiring minds want to know! :-)

DC

P.S. Watch the ortograffe! :-D

Re: Shaker Step Stool

#8

Alan Young

Ya know Jim I used to find shaker styled

Alan Young

>pieces to be somewhat uninspiring. No frills, simple lines, void of what I called interest. But you have illustrated what it really takes to pull off this style- dead-on accuracy. The shaker style leaves nothing to hide the variances of craftsmanship. You can do it or you can't.

I counted 20 dovetail joints. They all appear flawless-maybe they are or maybe you know "things" :^).... anyway it is a great piece of work. Maybe some day I'll have the guts to try a shaker piece....Now where's my belt sander. I need to even out that miter joint...

Alan

Re: Shaker Step Stool

#9

Another fine example of....

Mark Goodall - ATL - tooljunkie

>...a Shaver footstool! ;)

Very nice work!

Happy Woodworking!

Re: Shaker Step Stool

#10

Butt Ugly

Dustmaker Mike

>I don't understand why you put that Beautiful Stool on that Butt Ugly tarp?

I love the look the DT's add to the piece. Great Work

Re: Shaker Step Stool

#11

Re: Shaker Step Stool

Fred West in West Chester, PA

>Jim, gorgeous piece and what a wonderful gift for your daughter. I loved the whole coarse, medium, fine steps. Fred

Re: Shaker Step Stool

#12

Re: Shaker Step Stool

Kevin Adams

>Jim--

Beautiful as always. That has always been one of my favorite Shaker pieces and you've executed it perfectly.

So fess up now...which chisels did you use for the dovetails--the Blue Spruces or the Imais? Kayoko advised that my Imais are at the handle maker now, so I'm getting closer...

Take care,

Kevin

Re: Shaker Step Stool

#13

about to make one, questions...

VTAndy4

>Hi Jim,

Looks good. I'm about to make one of these, out of Thos. Moser's book on Shaker furniture. There are some minor differences but it is probably based on the same original.

There is one question I have that springs to mind every time I'm considering starting this project. The sides obviously consist of two edge-joined boards. For the shorter of those boards, did you actually cut the dovetails before glueing the edge joint? Or did you join the two boards first?

-Andy

Re: Shaker Step Stool

#14

Answer

Jim Shaver - Oakville, Ontario

>Hi Andy,

Yes you are right, I cut the dovetails on the boards before they are edge glued together. I planed the joined edges before I laid out the dovetails as well.

take care,

Jim

Re: Shaker Step Stool

#15

Re: Shaker Step Stool

Joanne Adler in Pt. Pleasant, PA

>Beautiful job, as always. Envious dovetails--but then, you did have some gorgeous cherry to work with and be so inspired. :-)

Dana will love this, especially since you made it for her. And useful? Well, we short girls have to stick together--she will very much appreciate the help when she's vertically challenged.

Thanks for sharing.

Re: Shaker Step Stool

#16

Re: Shaker Step Stool

Jim Shaver - Oakville, Ontario

>That is funny,

Well when I sat down to pare the Dt's I needed the longer Imai's, they are a dream to use.......for thinner stock I might have chosen the Blue Spruce chisels.

:-)

I know, I am spoiled.

Take care,

Jim

Re: Shaker Step Stool

#17

Can't be a Norm piece.

Virgil

>I don't see any brad nailer holes. Are you sure you followed the directions? Nice work Jim.

Re: Shaker Step Stool

#18

It's Like Playing The Triangle or Symbols?!?!

Jim Shaver - Oakville, Ontario

>Thanks Alan,

It's funny you said that, I do Know a few things, but the picture does show the reality of it all.

:-)

One of the details that I really focused on was how verticle the saw cuts were on the tails to get a clean fit with the pins, varience there is very clear if you miss it.

I see hand cutting dovetails like the instruments in an orchestra, some things like playing the triangle or symbols may seem very simple, but if you miss your timing everyone knows you missed.

:-)

Take care,

Jim

Re: Shaker Step Stool

#19

Thank You All

Jim Shaver - Oakville, Ontario

>Hi All,

Thanks for your kind thoughts and comments.

Virgil I would like to do my part for the Greening of the globe, so I did not use any Brads...:-)

I am looking at cutting some drawers for a piece I am working on now, with some special wood I can't replace...so keep an eye open Denis.

take care,

Jim

Re: Shaker Step Stool

#20

Wonderful dovetails!

Jim Dillon

>Jim,

Sorry I didn't respond to your post earlier, but on my slow dial-up connection your photos took awhile to download. Anyway, Rob Cosman better watch out as you are quickly catching up to his skill level; I wouldn't be surprised to see you standing next to Rob on his next woodworking DVD. Very nice craftsmanship!! Thanks for posting.

Jim

Re: Shaker Step Stool

#21

DT's

Jim Shaver - Oakville, Ontario

>Thanks Jim,

That is too funny, I have taken two clases with Rob and never tire of watching his magic work with a saw...

I also use the process for laying out my DT's with dividers as he taught me, it's simple and clean.

For anyone thinking of trying to get started in hand cutting DT's I recommend Rob's DVD's and classes.

I am not sure Rob would go for the Imai chisels, but I know he'd be watching.

Take care,

Jim