Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Regarding stain

Posts

Regarding stain

#1

Regarding stain

jeff

>Hi all

I saw the thread Marv started on matching his saw handles.

Thought I'd weigh in here as a good time.

In all my years of buiding stuff, I never stained a cabinet, so this is all new to me.

I built a set of Oak cabinets for my kitchen to fill a new area.

The old cabinets are oak also, but seem to be yellower then the new oak I used.

I can't seem to find a ready made stain that is close.

So, where do I start.

Do I take a stain and add coloring?

Usually I just shallec, poly, or use a Danish oil for finishing.

I think I need help here.

Jeff

Re: Regarding stain

#2

Re: Regarding stain

Marv

>Hi Jeff,

Most of my staining (pigment type) has been marginally successful and sometimes disasterous. Only recently I heard about dyes even though, as I understand, they've been around since the beginning of time. I haven't tried them yet but surely intend to. I've gotten some really good advice from some generous people here with their sharing. If you go to www.toolsforwoodworking.com you can read about the various dyes they sell on that site. They specifically feature the Lockwood brand. And they explain how to mix and use the dyes.

Marv

Re: Regarding stain

#3

Re: Regarding stain

John Pappas

>Jeff, impossible to give you a simple answer here. However, I recently used a water dye that matched my factory made oak cabinets. So, I give you this as something to start with if you can get it. Then, let us know how close it is, and how it differs. Maybe I, or someone else, can give you ideas on how to adjust the color to match.

Homestead Finish Products

Light Oak #3270 Available from Homestead, Rockler, Woodcraft, and other places.

John

Re: Regarding stain

#4

Forgot something

John Pappas

>Forgot something. Stain some scrap pieces, and apply the topcoat you are going to use. Can't tell about color unless you carry the process out completely.

Re: Regarding stain

#5

Jim in Burlington Ont.

Put the same finish on samples

Jim in Burlington On

>I'd start by sanding some samples and putting your finish on. There's alot of shades of shellac out there. It's also easily tinted by adding concentrated dyes. It's going to take you a few weeks to figure out a forumla and routine.

Re: Regarding stain

#6

Re: Regarding stain

Ron Hildreth, Alta, Iowa

>Jeff,

Can't tell you how to match the existing stain, but once seen a neighbor go to great pains to match stain on some cabinets. He came really close and proceeded to stain the add-on cabinet. Got all done when his wife told him it was too dark---she had just finished cleaning all the cooking grease off of the old ones and it had lightened them considerably! Go figure! Lesson learned- if trying to match existing stain, dye, or any finish, clean the old ones first!

Ron in Iowa