Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

HTC mobile base question?

Posts

HTC mobile base question?

#1

JL

HTC mobile base question?

JL

>My 18" bandsaw weighs in at about 390 lbs or so. Not something I'm comfortable pushing around on the floor (and it gouges the paint).

So, I'd like to consider either mounting it on a mobile base or putting it up on locking casters. Rockler carries the HTC2000 and the HTC3000. The load rating on the HTC2000 is 400 lbs and the load rating on the HTC3000 is 700 lbs. I'm leaning towards buying a HTC3000 as I'd be at the limits of the load capacity for the HTC2000. I can get locking casters with a 250 lb (each) capacity, but they would increase the height of the bandsaw and its table about 4-5".

So - do I need to buy the HTC3000 or can I get by with the HTC2000? Are there other relatively inexpensive options?

TIA.

Re: HTC mobile base question?

#2

Jet's Mobile base

Dominic Greco in Richboro PA

>I believe that the load rating is for the wheels and not the overall mobile base. As long as you're not going to have a big old slab of wood on there when you move it around, I'd say the HTC2000 should be OK. But you would have NO safety margin.

That being said, if the price difference between the two is marginal, I'd go for the HTC3000. A safety margin is always nice to have.

Jet sells a mobile base that works perfectly for my 8" Delta Jointer (which runs about 300-350 lbs). It will not raise your bandsaw up any more than a HTC would and I believe that the Jet mobile bases cost less. And it was a piece of cake to put together.

BTW, I also have an HTC mobile base on my Jet 18" BS. I'm not sure what model it is, but it works pretty well (but I assume it's the HTC2000). And it doesn't raise the BS any more than a 1/2".

I would stay away from the casters. They're nice for items like rolling tool cabinets and such. But the more you raise your BS up off the floor, the more unstable it will get. A BS is like a Drill press. Tall and a good portion of it's weigh is up top. Plus, raising it up higher may make it uncomfortable to work at.

Re: HTC mobile base question?

#3

Re: HTC mobile base question?

sreeb

>I have a laguna lt18 on a htc2000. It isn't very confidence inspiring but I haven't had any bad experiences yet. I only move mine 5' forward and back on a smooth concrete floor.

The shopfox base I have under my table saw is much more substantial.

Ed

Re: HTC mobile base question?

#4

Re: HTC mobile base question? *LINK*

Terry Stellman

>You could also look at these casters. If you click on the blog link they show them under a Mini Max MM16 and the claim is they work quite well.

Terry


Casters