Re:What we pay in Iowa
Grant Smith
>Early this spring, we had about 1700 BFt of lumber milled, most of it ash. This took a day with a woodmizer and four men to run the mill, handle logs, offcuts, and lumber. Lots of work!
The mill owneres fees were $1 per mile (one way) trip charge plus 25 cents per board foot. We agreed that hitting any metal would be $20 per blade ruined, but none was hit this time. The lumber was stickered and stacked (some in a corn crib, and some at a friend of mines house). I checked on moisture content just a day or so ago and it was between 14 and 20 percent.
The lumber will be moved to a kiln this weeekend, where I'll pay 40 cents per board foot to have it dried to 6-8% or so. The ash will be milled into flooring for $1 per square foot, random widths. The flooring miller figures about 20-30% loss between my 750 BFt of ash and his flooring output due to knots and width differences between my boards and his flooring dimensions (I think his definition of random widths is 2 1/4", 3 1/4", and 4 1/4"). The flooring he produces is what he calls "Amish flooring", which has tongue and groove, and relief cuts on the bottom side but no end milling at that price. Adding end milling is an upcharge. I plan to install a biscuit in the ends of the wider planks as the floor goes down.
So to summarize, logs to dried lumber costs .65 cents per board foot, though I have seen sawyers charge up to $1 per board foot. Then to have it milled into flooring is another $1 with some loss of square footage. Add your time and any incidentals such as acquiring stickers to the costs. I bit the bullet and bought 1x2" lumber on sale at Menard's for the latest haul. Cut them to 4' lengths, painted the ends orange to remind me that they are stickers and they are mine, and will reuse them for a lifetime.
This is the fifth time I have been involved with milling lumber. It is VERY rewarding. Though Ash isn't a pricey wood, I am betting you get some lumber out of the logs that will make you say it is very much worth it. These are the perfect boards that seldom make it to sale in the retail world. And then it is nice to be able to say "This floor is ash and it was milled from trees taken from the property" to guests...worth a lot in my book. Oh, and I also ended up with 250 BFt of Cherry and 300 BFt of Red Oak as my share of the haul.
You can also go to woodweb and use the calculators there to help you determine how much lumber is in a given log, how much it weighs, and so on.
Regards,
Grant in Iowa<---up to my ash in ash