Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

New Yankee Workshop 2008 Season Projects

Posts

New Yankee Workshop 2008 Season Projects

#1

New Yankee Workshop 2008 Season Projects

awh

>I don�t know why they�re not listing the project titles for the 2008 season. But, from what I�ve seen on the YankeCam up until today it appeared to be a lot of plywood carcass construction and not a lot of fine furniture on the schedule.

The past 2 or 3 filming days there has been very little activity within the workshop and today is no exception, except that it looks like Norm has a new tool in the shop [Rod are you reading? :)] he has what looks like a survey instrument (see photo below).

Tony Haukap

Home Page - http://www.cyberspace.org/~awh/

--


img

Re: New Yankee Workshop 2008 Season Projects

#2

Re: New Yankee Workshop 2008 Season Projects

awh

>If that was indeed a survey instrument it�s obviously an outdoor project. I think a deck or building addition would be a project better suited for �This Old House� and they have already covered sheds, greenhouses and fences. Here he is carrying what looks like a window (photo below).

Tony Haukap

Home Page - http://www.cyberspace.org/~awh/

--


img

Re: New Yankee Workshop 2008 Season Projects

#3

Working Photo Link 

awh

>


img

Re: New Yankee Workshop 2008 Season Projects

#4

Re: New Yankee Workshop 2008 Season Projects

Thomas Skaggs, Foothills of Mount Level

>Tony,

I think it is obvious. Norm just hand planed those 3 panels laying on his bench and he is checking the topography of his results. ;-)

Tom

Re: New Yankee Workshop 2008 Season Projects

#5

NYW fans, celebrate with me

MN deepwoods dave

>About a week ago I needed a tapered piece of trim, as I'm finishing up my kitchen. Norm's concepts permeate my thoughts and sometimes actions. This time the safest way to trim down my 11" piece of trim into an 1/8" to 1/2" wedge was with a tapering jig.

I fashioned it out of a couple old cedar barn boards with a hinge and a screwed-on angle adjuster. I routed a notch for the carriage bolts to slide in, with which I anchored it to my miter gauge. I realize it's quite primitive, but I couldn't get funding from PC and Delta quickly that afternoon to help me buy the $471.39 version I would use if I had a TV show. (ha ha)

If I can get my USB cable figured out I'll try and pop a picture on here. I told my wife and several friends about my joy in building a tapering jig and the only response I got was a blank stare.

Maybe I am with appreciative friends here?

Re: New Yankee Workshop 2008 Season Projects

#6

Re: NYW fans, celebrate with me

wilbur

>Heck, I'm celebrating, and I haven't seen your jig yet!

Re: New Yankee Workshop 2008 Season Projects

#7

Re: New Yankee Workshop 2008 Season Projects *LINK*

Alan S

>According to Norm in this interview, next season's shows will mostly be making an entire kitchen.


Interview

Re: New Yankee Workshop 2008 Season Projects

#8

Re: New Yankee Workshop 2008 Season Projects *LINK*

awh

>Looks like there was indeed a lot of carcass construction going on - in the press release it says "Norm will dedicate nine out of thirteen episodes to building kitchen cabinet basics".

Tony Haukap

Home Page - http://www.cyberspace.org/~awh/

--


Blum visited by The New Yankee Workshop

Re: New Yankee Workshop 2008 Season Projects

#9

PBS or DIY . . . ?

s.mackay@worldnet.att.net

>I pay attention to both chanels but nary a new episode. Come to think of it no new " TOH " or " ATOH " either. I HAVE discovered Mike Holmes though. Thanks to Canada for shareing him. Wish the USA had an honest contractor or tradesman of his caliber. Hope he never gets pinched for DWI or dope. I'd be crushed !