Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Jointer Rebuild Question

Posts

Jointer Rebuild Question

#1

Jointer Rebuild Question

wayne in Topanga

>This may seem like a dumb question. But, I will ask anyways. I am rebuilding a Jointer that has dovetail ways. What lubricant should I use on the ways. Ordinary grease is not a good choice because the oil it contains will wick out and get absorbed in sawdust making a mess and leaving no lubrication in the dovetail.

Does anyone know what the manufacturers use when they build these machines? Any help would be appreciated so I only have to do this job once.

Thanks in advance,

Wayne

Re: Jointer Rebuild Question

#2

Re: Jointer Rebuild Question

Chuck W

>What if you used a dry lubricant like graphite or maybe a spray-on dry type?

Re: Jointer Rebuild Question

#3

Re: Jointer Rebuild Question

Michael Wangler in Rochester, NY

>Wayne,

I rebuilt my old Rockwell jointer and I used white lithium grease with good results. Finished wood never gets near the keyways.

Michael

Re: Jointer Rebuild Question

#4

I've heard good thins about that stuff...

John in New Mexico

>but I've yet to try it myself (the spray on kind). I could probably find the name of the stuff they use where I used to work if anyone is interested in a specific brand.

John

Re: Jointer Rebuild Question

#5

Johnsons paste wax

Bill Tindal, E.TN

>I went to a Delta maintenance class and the instructor used Johnsons paste wax for these applications.

Re: Jointer Rebuild Question

#6

Re: Jointer Rebuild Question

Kneale Brownson in Northern MI

>My understanding from talking to a shop that rebuilds this kind of machinery is that the cast iron normally used in their ways is self-lubricating so no greasing is needed.

Nevertheless, I've used TopCote, which I treat cast iron tabletops with, on the sliding wedge of my old Rockewell planer, and the bed slides better that way.

Re: Jointer Rebuild Question

#7

Re: Jointer Rebuild Question

wayne in Topanga

>Thanks all for the advice. I will probably try the dry lube.

Wayne

Re: Jointer Rebuild Question

#8

Re: Jointer Rebuild Question

Scott Box

>We have found that a thin coating of white lithium grease works well. It is not a point that requires a great degree of lubrication. One shot usually does it.

Re: Jointer Rebuild Question

#9

Re: Jointer Rebuild Question

Ross

>Motorcycle chain lube, it's designed to dry lube without holding dirt.