Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Re-sawing grain question?

Posts

Re-sawing grain question?

#1

Re-sawing grain question?

Barry Irby

>I have been trying to resaw some heart pine I have for door panels (see my other post about three down.)

When I flat sawed them, I cut on a tangent to the growth rings but parallel to the pith if that makes sense. What would happen if I sawed at the tangent but at an angle to the pith? Seems the "cathedrals" would be shorter and more pronounced. Any thoughts?

Re: Re-sawing grain question?

#2

Re: Re-sawing grain question?

Tom Sontag - St. Louis

>If you mean sawing parallel to the bark versus the pith, matching up with the outer layers will give you longer taller cathedrals, or if done perfectly, no cathedral at all.

Re: Re-sawing grain question?

#3

Thanks Tom!

Barry Irby

>I went back and sawed a new set of panels, this time at a substantial angle to the vertical axis of the growth rings, or whatever you call it. The cathedral is much more pronounced. I posted a picture with the others.