Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>23 July 2007

Good Morning,

No woodworking for me as I have been out of town again for the day job.

Left eary Wednesday morning for Philadelphia and was able to visit Colonel George Dart and his life long friend Charlie Verna. I had a wonderful visit with George and Charlie on Wednesday evening before my work began the next morning. I got to take a tour of George's shop and was educated and encouraged by Charlie to widen my woodworking skills by trying my hand at woodcarving. I would like to try my hand at woodcarving as I feel it would make me a better craftsman, but so little time and it would require me to acquire some tools that I don't have for the sole purpose of carving.

Thanks to George and Cathy as well as Charlie and Clair for a wonderful visit and I greatly appreciate their hospitality.

Well, I survived yet one more Disaster Recovery Exercise and it was declaired by the customer as being successful. The real problem is that I just don't handle being awake all those hours as well as I used to.

I was going to visit with The Becker Family again, but things didn't work out to where I could visit with them Saturday evening as work and sleep decided it best for me to "get" some sleep as well as pack for my flight back on early Sunday morning.

Needless to say, I'm back at home now and I'm tired but getting ready for a visit tonight, hopefully, with Ken Fitzgerald and just maybe Tod Evans. So I guess I'd better get out there and start cleaning up my shop a bit today hugh?

So what did YOU do this weekend???

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Resolved my drill press obsession - gloat and pics

wilbur

>Last fall, when I was starting to get my workshop together, I decided to try to outfit my shop with used older woodworking equipment. Back in December, I got my second OWWM find, which was a Walker-Turner 16" bandsaw. The guy I bought the bandsaw from also had a Walker-Turner 15" bench top drill press for sale, also inherited from his dad. As I had just made my first OWWM purchase, a Delta Milwaukee Homecraft 11" drill press,


I initially passed on it. But then, the whole "it's a bigger drill press, so it must be better" mentality started kicking in, and apparently the seller's father bought the bandsaw and the drill press around the same time in the late 1940's, so I felt that it would be nice to keep the two pieces of equipment together, since they grew up together. So when I thought I should get it, someone else had already bought it. Since then, I've always felt a little like I separated a pair of siblings.

So imagine how excited I was last week to find the identical Walker-Turner drill press for sale, except in the floor standing version!


They certainly don't make these like they used to. 15" swing, 4.25" spindle travel, and it's even got the identical 1 944 "serial number" that the other drill press had. (Walker-Turner stamped "serial numbers" on their machine labels, but they were really more like model numbers, or production run numbers.)

It's in incredibly good shape. It could use a new belt, and the power cord insulation is flaking apart from dry rot, so I'll have to replace that, but otherwise it's in mint condition. The table is completely unmarked, and the motor is really clean.


It wasn't a super bargain price, but I got it for less than what the guy I bought my bandsaw from had wanted to sell his drill press for, and that was the bench top version. So I certainly think I got a deal. To look at it another way: the cost for my Walker-Turner 15" drill press is less than 15% of what a made-in-North-America 15" drill press costs today.

I may have separated my bandsaw from its sibling, but now I have cousins!


And I think that the OWWM bug has got me, because I originally thought that I could just go and sell the Delta Milwaukee Homecraft drill press, but I think I'll keep it around for a while, "just in case". But at least I can stop searching Craigslist and eBay. For a while.


Re: WC Weekend Accomplishments.....

#3

That is a truly cool gloat!

Bruce, a MN Galoot

>

Re: WC Weekend Accomplishments.....

#4

Worked on doors for Hunt board.....

Barry Irby

>Been building a heart pine hunt board. Yesterday it was time for the doors. Small drop panels doorw wth M&T joints. Turns out heart pine is the wood form hades for this project.

I resawed the wood quarter sawn for the project from some old beams. It is so full of sap/pitch that it reeks of turpentine.

Tried using a hollow chisel mortiser on the DP to punch the mortises. 1/4" chisel, nice and sharp. The chips would not clear and ending up just punching into one of the stiles and splitting it. The wood was so gummy with sap it was amazing, had to clean out the mortises with the air nozzle and small screw driver. I remade that one.

Tried drilling away some of the wood to make "clearance" for the hollow chisel. But the DP was set up for the mortising, so I used a hand drill. Put a stop collar on the bit to be SURE I did not drill out the back. It slipped. I remade that one.

These beams have been in my shed for thirty years. One of my stiles had a check in it I did not see and a corner feathered of. I remade that one.

On one of the center stiles, I changed the order of the cuts on the tenon. Split a long fat sliver out the side. I remade that one.

I'm not sure if I made the doors or remade them.

Re: WC Weekend Accomplishments.....

#5

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis and a Happy Monday,

I wondered how the exercise was going for you throughout the weekend. We all had a grand time during your visit. My tools were in a state of rapt anticipation, believing we would turn a few of them on. No such luck, and their bitter disappointment was, like, totally total. :<)

My sore shoullder felt much better so I began assembly of the upper and lower chest-on-chest cabinets on Saturday, and worked a few hours on them on Sunday. It feels so good to get back to having fun.

Charlie and I will get together on Wednesday and decide how to cut up those walnut and cherry log chunks I showed you from 5ive Barns.

We were joined by 5 of my kids, spouses and grandkids for a rather massive assault on America's chicken population for a family BBQ on Sunday night. We had a great party, lots of empties, and few leftovers. Have a great week.

George

Re: WC Weekend Accomplishments.....

#6

Re: Resolved my drill press obsession - gloat and

Bill White

>Betcha won't wear out the WT machines. Good haul.

Bill

Re: WC Weekend Accomplishments.....

#7

AWFS

Scott Whiting - Glendale, AZ

>Got there Thursday night and met my sister from Florida and then got a call, already after my bedtime, to meet some other forum folks for drinks. I am really getting too old to survive well on 4 hours of sleep. :-) Did the show Friday and 1/2 Saturday. The bigger the show gets the fewer people I run into that I know. Had the opportunity to meet and have dinner with Dave Arbuckle. The 3rd person (wearing my new hat!) in the pic is a regular at Woodnet. Saw lots of neat stuff and met up with several of my vendors. Not sure how it will hold up or sell but I thought the Steel City granite top was pretty cool.


img

Re: WC Weekend Accomplishments.....

#8

Re: Great meeting you, Scott.

Dave Arbuckle, Plano, TX

>There was some very neat stuff at the show. Best part is always getting together with folks I know, though.

Unfortunately, Ellis and I never managed to find ourselves in the same place at the same time. Hopefully we'll do better next time.

Re: WC Weekend Accomplishments.....

#9

Ellis Walentine

Yeah, I missed you, Dave

Ellis Walentine

>I had posted a note about planning to be at the Bosch booth on Thursday at noon, but only Mike Farinella showed up. I had met Joe Dusel the day before at the Woodworker West booth.

Next time, I'm going to plan a lunch ahead of time and make sure everyone is aware of it.

Ellis

Re: WC Weekend Accomplishments.....

#10

Re: Yeah, I missed you, Dave

Dave Arbuckle, Plano, TX

>I was probably gone before you posted the note, and didn't take a computer with me. It's like Coach used to say about "six p's", isn't it? ;-)

Re: WC Weekend Accomplishments.....

#11

Good on you, Wilbur!

Hank Knight

>That's a nice looking WT 900. You'll love it, and you're right: they don't make 'em like the any more. I posted about my Walker Turner drill press fetish a while back. I'm still loving mine.

Hank

Re: WC Weekend Accomplishments.....

#12

Re: WC Weekend Accomplishments.....

Clint Searl, at the base of Haycock Mtn

>Finished the 12x14 floating dock, replacing the old rotten stationary one. It rides on nine 2x4x1 floats under a 2x frame covered with composite decking from Lowes. The floats will support close to two tons. It can be turned loose to tour the pond. The 4x12 gangway is on pilings.

Clint


img

Re: WC Weekend Accomplishments.....

#13

Re: An End to Major Construction Operations

Kevin French, Antrim, NH

>I finished the railings and the steps in foreground, now there's just a bit of chinking, a few more Lag Bolts and adding the Cladding around the Rim Joists. That and I still have the electrical to do, once I figure out what I want.


img

Re: WC Weekend Accomplishments.....

#14

Ellis Walentine

Whoa, nice work!

Ellis Walentine

>Clint, we definitely have to get together again soon. You are one prolific guy.

Ellis