Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Tung Oil Finish Problem

Posts

Tung Oil Finish Problem

#1

Tung Oil Finish Problem

Steve Housefield

>We have a Shaker cherry drop-leaf dining table, finished in several coats of tung oil, several year ago, that has become extremely

"sticky" to the touch, esp. on the table edges. We've tried 0000 steel wool, and can't seem to fully remedy the problem. Any suggestions would be appreciated.

Re: Tung Oil Finish Problem

#2

Re: Tung Oil Finish Problem

Clint Searl, at the base of Haycock Mtn

>A quick fix may be to give it a good scrubbing with VM&P naptha using maroon ScotchBrite, and a final washdown using toweling. If that doesn't work, I suggest stripping and refinishing.

Clint

Re: Tung Oil Finish Problem

#3

Re: Tung Oil Finish Problem

Bill White

>I would suggest a strip job. If not it's gonna end up like a 50 yr. old sticky church pew.

If you want to go back w/ a tung-based finish, use a tung oil "finish". This stuff has the needed driers to prevent what you're experiencing.

Bill