Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Wipe On Poly Not Drying....Please Help....

Posts

Wipe On Poly Not Drying....Please Help....

#1

Wipe On Poly Not Drying....Please Help....

Rob Hix - King George, VA

>Ok, calm my fears here...

I stained some oak plywood late Thursday afternoon with Minwax Golden Oak Stain. I was originally going to wait until tomorrow or Monday to start the polyurethane, but I wiped on a coat this morning.

Ok, polyurethane thinned 50/50 with mineral spirits and wiped onto bookshelf sides and shelves. This was completed by 10:00 A.M. this morning. At about 12:00 A.M. I turned over the shelves and put a coat of poly on the other side of the shelves.

I just went out and checked on the pieces. There are a couple of spots of polyurethane that are not completely dry. This is occurring both on the shelves and the sides, but mostly one of the sides. The only spots that are feeling tacky on the shelves or the sides are over the open grain portions of the oak.

I am guessing the stain was not completely dry and it is hindering the drying over the open grain sections. Does that sound reasonable?

Now, what do I do if it is not dry in a couple of days? I am thinking seal it up with SealCoat and keep on with the poly. Will that work or will I end up with non-dry spots of SealCoat?

Thanks for the input,

Rob Hix

Re: Wipe On Poly Not Drying....Please Help....

#2

Re: Wipe On Poly Not Drying....Please Help....

Chuck Lenz

>Your rushing the job.

Re: Wipe On Poly Not Drying....Please Help....

#3

Why 50/50 Rob?

Scott in Eastern Iowa

>I never thin poly by more than 20% and have not had a problem.

Just curious why ...maybe thats the problem too?

Re: Wipe On Poly Not Drying....Please Help....

#4

Re: Wipe On Poly Not Drying....Please Help....

Steve Schoene

>It would be a very bad idea to over coat with shellac if the underlying finish hasn't cured, particularly when you don't quite know why. Be patient with the poly, give it several more days, helping it along by keeping it in a relatively warm, dry area.

Re: Wipe On Poly Not Drying....Please Help....

#5

Re: Wipe On Poly Not Drying....Please Help....

Thomas S Stockton

>The stain should have been dry unless it was real thick. If you used an oil based stain it shouldn't really effect the poly as they are fairly compatible with each other. My guess would be to much thinner or old poly. I would let the pieces sit until they are dry it might take a day or maybe more. Unless you want to strip the finish there is really not much to do until it dries. If you put shellac over it you're just going to create a huge mess. 50/50 mix is a little thin I usually thin at most 10% and use naptha because it will dry faster than mineral spirits. I would also start with a new can of finish I had a similar problem not to long ago, I thought it was a newer can of poly but the lid wasn't on tight so some essential ingridient to drying evaporated away and the finish took a couple of days to dry, once dry I used a brand new can and had no problems. I don't live in a very humid area so I not totally sure how that effects poly but I would think it would slow it down.

Tom

Re: Wipe On Poly Not Drying....Please Help....

#6

Re: Wipe On Poly Not Drying....Please Help....

Rob Hix - King George, VA

>Thanks all for the help,

There was a little drying overnight. I have pulled two shelves into the house to see if that helps speed the drying (more constant temp and humidity).

The finish was a brand new can of Olympic polyurethane from Lowe's. At least it was new to me. I am assuming that it had not been sitting on the shelf for ages.

It looks like it will be ok. I will probably only thin like 25-30% on the next coat to see how it looks. I will sand what I can this afternoon and get on with the polyurethane application.

Thanks for the input, but I am not nearly as scared now as I was last night.

Re: Wipe On Poly Not Drying....Please Help....

#7

Re: Why 50/50 Rob?

Larry Clinton At Frankfort (Central)., Indiana

>I routinely thin Minwax polyurethane 50% - never ever had any problem. I have also mixed 1/3 each of BLO, Poly and thinner with no issues. At 50, using acetone or naptha, I can spray a thin film that is dry to the touch, (not cured) in a few minutes on a hot day, I would much rather spray several thin coats than one or two thick ones. I also have mixed poly with thinner at 30 to 50% and wiped it on - IMHO it came out very well. I would not worry about your finish for a few days. The oil based stain is compatible with the poly (you could have mixed the two together and it should have dried fine). I would wait - doubt you have any problem.

Re: Wipe On Poly Not Drying....Please Help....

#8

Re: Wipe On Poly Not Drying....Please Help....

Howard Acheson

>Did you wipe off the excess stain after letting it set for 15-30 minutes? It sounds like the stain may not have been dried or that it was applied without wiping off the excess. You may end up being OK but frequently, an oil based overcoat will not dry properly over stain applied that way.

Re: Wipe On Poly Not Drying....Please Help....

#9

Re: Wipe On Poly Not Drying....Please Help....

Ted Wong

>I've had stuff that took forever to dry when it was hot and humid. Once the air and temp settled down things cured well.

Re: Wipe On Poly Not Drying....Please Help....

#10

Re: Wipe On Poly Not Drying....Please Help....

Stephen Kirk in Quakertown, PA

>I had a problem like this. Just wait a little longer if it's pretty humid. I even put my pieces outside in the sun to speed things along. After another day, everything was OK and further coats dried fine.