Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

OT-For Gun Buffs

Posts

OT-For Gun Buffs

#1

OT-For Gun Buffs

Ken Oakley-Sunny St. Cloud, Fla.

>I have aquired a Winchester Model 270 pump action .22 cal rifle, manufactured prior to 1968 as it has no serial number, in good condition except one small problem. It loads, cocks, and fires but apparently the firing pin is either broken or stuck because it is not striking the rim of the cartridge. It has been 53 years since I had to field strip, clean and reassemble weapons, so I have forgotten just about everything I learned in the Army, and not having an owners manual makes it even more difficult. Anyone know of a good supplier of new or used replacement parts? Any help greatly appreciated.

Re: OT-For Gun Buffs

#2

Re: OT-For Gun Buffs

Eddie Pacheco, San Jose, Ca.

>Did you look in the end of the barrel to see if the bullet is seated properly while your wife pulls the trigger?.....:-)

Re: OT-For Gun Buffs

#3

Re: OT-For Gun Buffs

Ken Oakley-Sunny St. Cloud, Fla.

>That was the first thing we tried.Too dark to see.Thought about putting it in my ear to try to hear if the pin is making contact with the cartridge. She thought I 'd hear it better if we used the .357.

Re: OT-For Gun Buffs

#4

Re: OT-For Gun Buffs

dave nichols

>Try Brownell's,http://www.brownells.com

Re: OT-For Gun Buffs

#5

Re: OT-For Gun Buffs

Randy Johnson Connersville, IN

>No matter when it was made it should have a serial number.

95% of the time the problem you describe is caused by old oil gumming up and more or less shortening the firing pin. The problem is very common in cold weather even when the oil is new.

My preference in firearms are ones that load from the front and have a piece of flint for the firing pin. As such, while I THINK I know the model you have I'm not sure and I can't begin to tell you how to break it down. You need to find a good gun shop or shooting club and start asking questions.

Re: OT-For Gun Buffs

#6

Re: OT-For Gun Buffs

Dale Stansbery

>Look up Numrich Gun Parts on Google. For about $5.00, you can get a catalog that covers most American Firearms and has exploded parts diagrams. They also carry the parts for a lot of them if they're not too obsolete. It sounds like yours probably needs a good cleaning. If you can figure out how to get the bolt out, a good long soak in WD 40, then oiling with gun oil may do the trick without disassembling the bolt..

Re: OT-For Gun Buffs

#7

Another option would be to go to the NRA site and

Don henthorn

>check around for help. I have been told that they have exploded views and information about most guns. I have never looked but I am a long time member and have found many other useful things on the site.

Re: OT-For Gun Buffs

#8

ROFLOL!!!!!!!

Eddie Pacheco, San Jose, Ca.

>

Re: OT-For Gun Buffs

#9

what gun smiths are for

Bill Tindal, E.TN

>I take these problems to a gun smith.

Re: OT-For Gun Buffs

#10

Re: what gun smiths are for

Ken Oakley-Sunny St. Cloud, Fla.

>But I am cheap

Re: OT-For Gun Buffs

#11

But the gunsmith is even cheaper.

Basil

>Really.

I believe that's one of the rifles I always wanted but never aquired. There was an old man here that had one when I was a kid. He could knock a squirrel out of a tree like nobody's business.

If it has had a lot of use, the firing pin is worn out. If not, it's bent. Either way the gunsmith can make you one. Shouldn't cost to much.

Basil

Re: OT-For Gun Buffs

#12

Out of curiosity Don.....

Randy Johnson Connersville, IN

>Did you ever do any business with Roy Knight? Roy's 92 or 93 now and has been in business for over fifty years. What he doesn't know about cartridge guns ain't worth knowing.

Also, a man who I think was probably a former classmate of yours is a world famous shooter and codeveloper of one of if not THE most widely used benchrest cartridges in the world, the .22 and 6mm PPC. His name is Ferris Pindell. He doesn't shoot much anymore but he still puts time in developing better ways for other people to do so.

Re: OT-For Gun Buffs

#13

Re: OT-For Gun Buffs

Ken Oakley-Sunny St. Cloud, Fla.

>Great site- Thank you

Re: OT-For Gun Buffs

#14

Re: OT-For Gun Buffs

Ken Oakley-Sunny St. Cloud, Fla.

>From what I have been told prior to 1968 serial numbers were not required on rifles. I do thank you for your advice.

Re: OT-For Gun Buffs

#15

Re: OT-For Gun Buffs

Randy Johnson Connersville, IN

>The serial number might not be obvious but I still bet there is one there somewhere. The reason I say this is that serial numbers are one of the main tools used by collectors to tell when a gun was manufactured. There are lists available that give the range of each year's production from any given maker. With theses lists it is possible to determine the exact year a gun left the factory. Colt, Smith&Wesson, Wincester,and Remington will, for a fee, tell you where the gun you have was first sold and what day it left the plant. They do that with the serial number.I have NEVER heard of a massed produced gun without a serial number. A few feet from where I sit are two rifles that date back to the thirties, a Stevens Favorite and a model 6 Remington .22. They both have serial numbers.

The Gun Control Act of 1968 was inacted in the wake of the assasinations of John and Bobby Kennedy and Martin Luther King Jr. I don't remember the serial number provision but it would have covered custom guns that might not have had one

Re: OT-For Gun Buffs

#16

Oakley....Oakley?

Dave Bair, Eaton Rapids, MI

>That name seems familiar, in a gun context, but I can't seem to put my finger on it.

Re: OT-For Gun Buffs

#17

Dale Lenz

Re: Oakley....Oakley?

Dale Lenz

>Ken is really a high roller, with his marketing of his shades, : ' >. Ya, he was in plastics. Ken you sly cool dog you, : ' >.

Re: OT-For Gun Buffs

#18

Anniebody have the answer?

Jason Roehl in Mulberry, IN

>

Re: OT-For Gun Buffs

#19

Ouch!__________

Rod Peterson -- Ormond Beach

>

Re: OT-For Gun Buffs

#20

Re: Oakley....Oakley?

Ken Oakley-Sunny St. Cloud, Fla.

>I also have a trucking company, played in the NBA, am a U.S State department bigwig, plus many other notable endeavors. Annie Oakley was not her real name so I don't claim any relationship to her. I am a straight shooter, though.

P.S. They just arrested an Oakley for selling nuclear secrets to the French, I believe. Not related to me.

Re: OT-For Gun Buffs

#21

Re: OT-For Gun Buffs

Rick W

>Randy,

It's interesting you mention that your Stevens Favorite has a serial number. My Model 1915 doesn't. Can you tell me where the serial number is located on yours so I can double-check mine?

Thanks,

Rick

Re: OT-For Gun Buffs

#22

Colonel George made me do it!

Jason Roehl in Mulberry, IN

>

Re: OT-For Gun Buffs

#23

A friend showed me this site, and *LINK*

Bruce, a MN Galoot

>if you haven't found what you're looking for yet, I'll bet Numrich has it:


Numrich Gun Parts

Re: OT-For Gun Buffs

#24

Re: OT-For Gun Buffs

Randy Johnson Connersville, IN

>On the bottom tang behind the trigger.

Re: OT-For Gun Buffs

#25

Never shake the family tree to hard.

Basil

>No telling what may fall out of it.