Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

small stuff push block, picture this time

Posts

small stuff push block, picture this time

#1

small stuff push block, picture this time

Wayland

>OK, here is a photo of the push block I described in a previous message. It's for pushing small stuff on a router table, and is quite simple, made from a scrap of wood, a piece of pipe insulation, and 6 staples.

If you try one, let me know how it works.

Wayland


img

Re: small stuff push block, picture this time

#2

Re: small stuff push block, picture this time

Barry Irby

>Thanks. Looks good. Just made my Pack Rat Gene tingle though, wondering if I saved six inches of pipe insulation. OTOH, I ahve other "stuff" such as shelf liner and mouse pads and Foamy's.

Re: small stuff push block, picture this time

#3

A clever idea

Bill Tindal, E.TN

>I've got some pipe insulation and will have one fabricated shortly. thanks for posting

Re: small stuff push block, picture this time

#4

Here's my pushstick collection

Tom Pilsbury

>The green one is similar to yours. Just a scrap of wood with a piece of mousepad glued to the edge. The homemade pushblock also has a mousepad glued to the base and a piece of hardboard for the rear lip. I was using the modified paint stirrer to push thin strips between the fence and blade guard/splitter till I made the plywood pusher. The white plastic one came with the jointer and works okay, but I prefer my homemade. The funny looking one on the right I use for small pieces on the band saw. Lay it flat on the table and hook the lip on the rear of the workpiece. Works great! The red piece of plastic is of course Jet's attempt at humor.


img