Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Rocking chairs and hardwood floors

Posts

Rocking chairs and hardwood floors

#1

Rocking chairs and hardwood floors

Brent Richardson

>I have recently refinished two antique rocking chairs that my wife would like to add to our den which has traditional 2 3/8" oak hardwood floors. The rockers on the chairs are approximately 1 1/2" wide. I am concerned about creating permanent dents in the hardwood floors with the rockers. Any suggestions on how to minimize this potential damage? Thanks.

Re: Rocking chairs and hardwood floors

#2

Re: Rocking chairs and hardwood floors

Bill White

>Brent, as long as the rockers are not rough or have imbedded (sp?) hard junk, you should not have any trouble with marking up the floor. Is the floor solid, laminate, or engineered?

Bill

Re: Rocking chairs and hardwood floors

#3

Re: Rocking chairs and hardwood floors

Brent Richardson

>The floor is solid oak. The old type that is nailed in place, sanded and then finished. I have seen the marring issue with other rockers on oak hardwood floors and want to do all I can to avoid this problem.