Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

SHOP WIRING QUESTION

Posts

SHOP WIRING QUESTION

#1

SHOP WIRING QUESTION

Alan Tolchinsky

>Hi All, Well great news! I just passed my rough in inspection of my shop wiring. I've done it all in EMT conduit with a subpanel and using all 20 amp circuits. The inspector noted one thing on the rough in though. He told me it was not up to code to have stranded wire wrapped around a screw. He was talking about my box ground wires but it applies to all connections. He said you needed to have crimp on connectors. I don't like doing those connections and feel they are not real secure(at least the way I do them).

Any other ideas on terminating stranded no. 12 wire on a screw? Or should I just learn how to do crimp ons better. Thanks!

__________________

Re: SHOP WIRING QUESTION

#2

Re: SHOP WIRING QUESTION

JKJ in East TN

>Crimping is a proven and effective method, probably the best method for stranded wire. Using the proper size connectors and crimping tool will assure a good connection. If you purchase connectors and tool at a good supply house I'll bet they would provide instruction if needed.

JKJ

Re: SHOP WIRING QUESTION

#3

Re: SHOP WIRING QUESTION

Phil Joines Krum, Tx

>Use good connectors, T&B, Burndy, etc. You want the ones with welded seams. Get a rachet type crimper, the kind that has to close all the way before it will open. Ideal and Palladen (sp) make them in a midrange price.

Re: SHOP WIRING QUESTION

#4

Re: SHOP WIRING QUESTION

Binen

>If you are doing them yourself time/money isn't of high importance. You could take the time to solder them if the code allows. Check with the inspector he might allow you to solder the strands into a single mass. Best policy is to ask the inspector what he wants and do it his way.

Binen

Re: SHOP WIRING QUESTION

#5

Easy fix

Grant Smith

>Alan,

You may find that the easiest solution is to pick up some ground crimp-on sleeves and crimp your wire to a short piece of solid core and then make your screw on connection with that. This is how I connect ground wires. These are small uninsulated sleeves that get crimped to up to 3 wires. Usually found in the electrical aisle at homecenters.

You could also wire nut the stranded to a short piece of solid core and screw that to the box.

But if the inspector wants to see crimped on terminals...do that and make him/her happy. Path of least resistance is usually the best bet with them.

Regards,

Grant in Iowa