Tool Cabinet, Progress
Jim Shaver - Oakville, Ontario
>Hi,
I have been working on a shop project to organize some of my shop tools.
For a long time I had a cabinet I thought was pretty good, I designed it with horizontal doors, thinking it would be easy to keep the dust out and the doors closed. I think it began to bother me the day after I hung it on the wall 8 years ago.
It filled up with things like boxes of nails and screws, odd items that had no other home and soon it became my junk cabinet.
So I decided a few weeks ago it had to go.
I went to HD and bought some Baltic birch play, 11MM and 17 MM and made the basic cabinet.
Of course I decided I wanted better looking doors than the old ones and found a few walnut boards that might do the trick.
So I made a pair of larger doors, using a floating tenon to save me from a measurement mishap (woops!), traditional tenons for the smaller door.
So today I found some time and took some of the mostly sap wood walnut I had and made floating panels.
So here they are dry fit, I am thinking a lattice for the top with a Lexan window in each.
This is a shot of the back of the door, you can see the rebate fit.
The interiors of the cabinets will have some wood fixturing made fro my planes that do not fit over by the work bench.
Anyway just a Progress shot for now, hopefully a finish one soon.
Take care,
Jim




