Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Stain drying time...

Posts

Stain drying time...

#1

Stain drying time...

Rob Hix - King George, VA

>Hey all,

What is you opinion on stain drying time? I am applying rubbed on oil-based polyurethane over oil-based stain. There are times when I wait a few days between stain and polyurethane to give the stain time to dry, and there are time when I do not.

Questions are, (1)Do you give your stain time to dry, and if so (2) How long do you let it dry?

Thanks in advance,

Rob Hix

Re: Stain drying time...

#2

Re: Stain drying time...

George@Colonel's Workshop-Havertown PA

>Good Afternoon Rob,

I am familiar with the problem of stain drying. The instructions on the can are approximate, and are good guides most of the time. Drying time varies in my shop with the temperature and relative humidity, as well as the nature of the stain used.

As a rule of thumb I always wait until the next day to continue the finishing schedule. And, if I am going to rub it out I wait a couple days. I generally take a piece of clean Scott towel and rub the stained surface. If it comes away without a skid mark, I feel safe to continue. Best to wait and not screw it up.

If I am using an oil based stain I always seal it with a spit coat of shellac prior to introducing oil based varnish/poly top coat.

About the only stain which dries completely is the stuff left over in the can which you thought you'd use up. I always buy the smallest container and dispose of left overs. This time of year can be humid, and considerably lengthen drying time.

George

Re: Stain drying time...

#3

Two days minimum, three is better.

s.mackay@worldnet.att.net

>

Re: Stain drying time...

#4

You need to talk to our builders...

Jason Roehl in Mulberry, IN

>...we're lucky to get overnight sometimes before we have to finish something because the carpenter is breathing down our necks to put it in. Grrr...

Jason