Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

New old bench vise...

Posts

New old bench vise...

#1

New old bench vise...

John in New Mexico

>A friend gave this to me last week in Tucson, never seen one like it. I'm pretty curious to mount it on a bench and see how it works. Anyone familiar with these?

John


img

Re: New old bench vise...

#2

Tightening screw 

John in New Mexico

>


img

Re: New old bench vise...

#3

The underside 

John in New Mexico

>


img

Re: New old bench vise...

#4

And one more goodie...

John in New Mexico

>A bandsaw blade welder, missing a few parts, but man am I looking forward to welding rather than soldering my blades!


img

Re: New old bench vise...

#5

Re: New old bench vise...

john l. blue

>Hellacious pics! If you don't mount it soon, send it to me,please!

Re: New old bench vise...

#6

Nice

Michael Stadulis, in Gloucester County, NJ

>I've never seen one either. Very interesting design. Version 1 of Quick Release....I guess.

Mike

Re: New old bench vise...

#7

Re: New old bench vise...

Jesse in New Mexico

>Wow, that's different! Thanks for sharing the pics!

Re: New old bench vise...

#8

Re: And one more goodie...

Marv

>High John,

I have one on my Jet Bandsaw. I found that the knealing step is the most important. I made a shear that cuts the blade ends dead square. This will give you a more even weld without blobs. When I cut the blade ends I do it so the teeth will come out properly spaced after the welding. Then I carefully file the tooth or teeth near the weld so they are inline and the same as the adjacent teeth. Most of the time I can get the blade so I don't have that annoying nick nick nick as it cuts. Also make the diameter of the blade near it's maximum so you can reweld the blade a few times if needed. I have used my bandsaw like a large scroll saw by cutting the blade, sticking it through a hole in the wood and then rewelding it. There are easier ways of doing that of course. I did it on a really thick piece of wood.

Marv