Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Fire safety - how to store flammables?

Posts

Fire safety - how to store flammables?

#1

Fire safety - how to store flammables?

Denny

>Folks

I'm starting to think that all of the cans and jars of solvents and finishes that I've accumulated should probably be kept somewhere safe. Of course right now they're tucked away where ever there's room. A quick search on the web shows the cheapest small flammable cabinets that I can find cost about $300 - $400. There must be a less expensive solution, or maybe I shouldn't even be concerned about the small volumes that I'm dealing with? Any ideas?

Thanks,

Denny

Re: Fire safety - how to store flammables?

#2

JL

Re: Fire safety - how to store flammables?

JL

>The flammable cabinets are expensive. An alternative - get a close-fitting metal cabinet with a tight fitting door - ground the cabinet. We got some Eagle cabinets (4 gallon capacity) for the lab that I used to work for. They were $250-300. These were the "bench top" type.

Re: Fire safety - how to store flammables?

#3

Re: Fire safety - how to store flammables?

Ron Hildreth, Alta, Iowa

>Denny,

Check with your local Fire Chief, or local codes first, But I squeaked by with the use of an old four drawer metal filing cabinet that I picked up at an auction for about five bucks. Old refridgerators can be used, too, but a little bulky for a full size one for my small shop - but I do keep the liquid fire extinguisher in there---my beer!!!!

Anywho, use your imagination for other options as long as code allows.

Ron in Iowa

Re: Fire safety - how to store flammables?

#4

Re: Fire safety - how to store flammables?

Larry Marker

>I use an old refrigerator. I removed the light socket and all of the other wiring so that it never can be electrified by accident. I put simple hasps on the two doors to keep them closed.

Larry

Re: Fire safety - how to store flammables?

#5

Re: Fire safety - how to store flammables?

john l. blue

>put them out there with the lawn mower and tractor and them gas

and kerosene cans under that shed. Blue in NC.

Re: Fire safety - how to store flammables?

#6

Thanks, thinking inside the box...

Denny

>The idea of using a file cabinet made me think that a well made metal toolbox or two might be just what I need. I think I even have a few I was going to get rid of.

Re: Fire safety - how to store flammables?

#7

Re: Fire safety - how to store flammables?

Paul Dwight

>There was a thread on this a month or two back over at sawmillcreek.org. Lots of good discussion.

My understanding of the issue is that the main purpose of flammable liquid storage is to keep a fire that started elsewhere in the structure from reaching, and being accelerated by, the stored flammable liquids. The challenge is somewhat similar to to the fireproofing required between an attached garage and the living space. It seems to me that a good compromise between cost and effectiveness would be to build a closet with 5/8" drywall on the inside and outside of the stud walls. Insulate the stud bays with fiberglass. Hang a solid core door, fully weatherstripped. A storage area like this should give firefighters a pretty long time to bring a fire under control before it ignites the flammables.

The issue I'm most uncertain about has to do with venting vapors that could accumulate inside the storage area. You wouldn't want vapors to accumulate in a sealed area to the point where a spark could touch off an explosion or fire. On the other hand, a vent into the interior of the shop seems like it would create a way for heat and sparks from a shop fire to reach flammable liquids in the storage closet. Venting the storage closet to the outside would probably be ideal. An interior vent might be OK with some kind of a baffle arrangement to protect against sparks and burning embers -- I'm not sure what that would look like.

Hope this helps. -- Paul

Re: Fire safety - how to store flammables?

#8

Re: Fire safety - how to store flammables?

Denny

>Paul,

Thanks, I'll check out the thread. This sounds like more than I can manage for now, but excellent info to consider (and certainly things I hadn't thought about).

Denny