Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Advice on Bench Vise Purchase?

Posts

Advice on Bench Vise Purchase?

#1

Advice on Bench Vise Purchase?

Jesse in New Mexico

>Hi all,

I'm building a workbench and would appreciate any advice on selecting vises. What separates a good vise from a poor one? What features should I look for? Anyone have a vise that is a real pleasure to use?

I only do flat work, mostly furniture for the house.

Thanks in advance.

Re: Advice on Bench Vise Purchase?

#2

Re: Advice on Bench Vise Purchase?

Verne in NJ

>For your first bench, I'd look at a quick-release woodworking vise like those that were once made by Record. I think Lee Valley and Woodcraft carry high quality vises that are copies of the Record. It's a terrific vise that's easy to mount.

I also have a bench with the Lee Valley twin screw vise and a patternmakers vise (a copy of an Emmert that I bought at Highland Hardware). Both the twin screw and the Patternmakers are a little tricky too mount, but if I could do it so could you.

I now use the twin screw and the patternmaker vises more than the Record, but I use all three and would not give up any of them.

Good luck and have fun with your bench!

Re: Advice on Bench Vise Purchase?

#3

Re: Advice on Bench Vise Purchase?

John in New Mexico

>Hard to say Jesse, though I never did like the Record with the curved release handle (always snags something). Other than that though, I've never used a new one. If you don't have time or inclination to build traditional vises into your bench, I'd say its hard to go wrong with the traditional iron face vise. My preference is for my old Columbian, but I seem to remember liking the Wiltons' way back in high school shop. I'm back in NM now, so I'll post pics of the one I just picked up that I mentioned over on the hand tools board.

John