Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Painting a Vanity

Posts

Painting a Vanity

#1

Painting a Vanity

Ford Beardsley

>I am making a vanity with a mirrow and a chair for my granddaughter.

My daughter wants it painted white. I need help as to what kind of paint I should use. Should I use a brush or spray it on.

I have access to a sprayer but have never used one. Should I use spray cans?

The vanity is made of poplar and the top is hard maple so when she is useing the vanity as a desk it shouldn't dent the top.

Thanks in advance

Ford

Re: Painting a Vanity

#2

a glass smooth result.....

Bill Tindal, E.TN

>Prime with Kilz and then sand smooth with 220 paper. Kilz builds a thick film, dries quick and then sands easily. The result will be a glass smooth surface for the top coats to go onto. I top coat (2 coats) with an oil based paint, either brush or spray depending on the size of the project. The result is a surface that feels like glass.

Alternatively you can spray a white lacquer, but probably can't buy less than a gallon so that may not be practical.

What ever you do......practice on some test piece. The final project is a very poor place for learning to finish.

Re: Painting a Vanity

#3

Oil based enamel

Paul Dwight

>I agree with everything Bill said. Use an oil based enamel and it will dry to a hard, durable surface with lots of sheen. A well-applied oil enamel can often pass for a sprayed lacquer finish.

You can spray the enamel if you want, but it will go on very nicely with a brush, as well.

A word of caution -- none of the waterbased paints you can buy at a big box store will be suitable for your project. Acrylic wall and trim paint never gets hard enough, in my experience, for use on furniture.

Good luck! -- Paul

Re: Painting a Vanity

#4

One downside is ...

Mike Farinella

>Oil based white paint tends to yellow over time. It happened to me twice using premium paint. Lacquer is your best choice.

Re: Painting a Vanity

#5

Re: Oil based enamel

Jason Roehl in Mulberry, IN

>There is at least one waterborne product that gets as hard as oil, and does so faster--Sherwin Williams' Pro-Classic Waterborne. I've also heard there is a Behr product (Home Depot) that does the same but I have no experience with it. Just make sure that you pick the next sheen up from whatever you want with the Pro-Classic...it's a sheen duller than the label indicates in my experience (many, many gallons on trim and doors in new construction houses).

Oh, and it doesn't yellow.

Jason (pro painter)

Re: Painting a Vanity

#6

Re: Painting a Vanity

Clint Searl, at the base of Haycock Mtn

>Base coat with any good flat latex acrylic interior wall paint. Sand to 220. Brush on 3 coats of Benjamin Moore high gloss alkyd enamel. Great finish. If you have a spray setup, you can shoot a gloss acrylic solvent lacquer over the latex acrylic for a great finish, also.

Clint