Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Best Finish for White Oak - Exterior Use

Posts

Best Finish for White Oak - Exterior Use

#1

Best Finish for White Oak - Exterior Use

Scott in Eastern Iowa

>Evening.....

I'm wondering what the best finish would be for a white oak bench I am making for exterior use. Im guessing BLO or Spar Poly ....but are there more or better options?

Thx,

Scott

Re: Best Finish for White Oak - Exterior Use

#2

Re: Best Finish for White Oak - Exterior Use *LINK*

Phil Joines Krum, Tx

>I use the TWP 100 clear for just about all my outdoor stuf.


http://www.twp100.com/

Re: Best Finish for White Oak - Exterior Use

#3

Re: Best Finish for White Oak - Exterior Use

Binen

>This is going to sound off the wall. Growing up we had outdoor stairs to the basement. I remember my dad making new doors when I was maybe 7 or 8. Well, I was a kid so I could have been anywhere between 5 and 15 really. For a finish he coated them with used motor oil. Once a year he would give them a fresh coat of used oil. The doors were still there over 40 years later and in good shape. Not sure why used oil but he insisted on it being used. I am not sure used oil would be the best choice for a bench.

Binen

Re: Best Finish for White Oak - Exterior Use

#4

As far as I know, motor oil is non-drying...

John in New Mexico

>and thus not a good choice for seating unless the bench will be outside a mechanic's shop :) I've heard of using it in applications such as you describe before, and seems to work well for those.

I just bought some Sikkens SRD for our ipe porch. The test patch I did is looking pretty good, it actually penetrates a bit (not easy with ipe) and looks like an oil finish. I've also used Penofin outdoors and it seems to work ok. Though Cabot's gets a lot of attention, I think they just hired the Thompson Water Seal marketing team, since their promotion seems to be a lot better than their product. In general, I prefer not to use film finishes outdoors, as they eventually start peeling and then require a lot of effort to refinish. I think a high quality spar would be ok if you don't mind refreshing the coating every year or two -- but that's about how long they claim the Sikkens will last, so I still favor the easier recoat!

John

Re: Best Finish for White Oak - Exterior Use

#5

+1 For Sikkens

Mike in VA

>I used Sikkens Cetol on the redwood rails on my deck, three years ago. They still look great. This is the best performance I've gotten from any finish I've tried. Contact their customer service group for recommendations.

Re: Best Finish for White Oak - Exterior Use

#6

Penofin, recommended by Wayne Miller of BP fame

Dave Smith, Longview, WA

>I have used Penofin, penetrating oil finish, on a couple of outdoor pieces and it holds us well to the rains on the wet side of the Cascades in Washington. Not cheap but protects wood extremely well.

Dave Smith

High 90's yesterday, rain this morning, this must be Longview, WA.

Re: Best Finish for White Oak - Exterior Use

#7

Re: Best Finish for White Oak - Exterior Use *LINK*

Paul Dwight

>I use Olympic Maximum (see link below). Lowes stocks it. I can't say for sure how it holds up in midwestern winters -- we don't have to worry about that here in Phoenix -- but I do know it stands up to sunshine quite well. Like any outdoor finish, it has to be renewed periodically. The great thing about this product is that reapplication is so simple: you just knock the dirt off the piece and slap on another coat by any convenient means. No stripping, no sanding, no scraping, no worries.

Good luck! -- Paul


Olympic Maximum