Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Williams and Hussey Moulder

Posts

Williams and Hussey Moulder

#1

Williams and Hussey Moulder

Dave Winters

>I need to make a bunch of radiused top window casing. I have heard about the Williams and Hussey Moulders, and checked out their website.

But I still don't get how they work for radiuses mouldings. And it sure doesn't look like much machine for $2600.

However, I've priced the stuff made up from three vendors and they want between 20-30 dollars a foot!

Anybody have experience with these things?

The profile is a simple r2e (radius two edges).

Thanks!

Re: Williams and Hussey Moulder

#2

Rick L

Re: Clone?

Rick L

>Shopfox makes a clone of the W&H for half the price.

Re: Williams and Hussey Moulder

#3

Re: Williams and Hussey Moulder

Dave Arbuckle, Plano, TX

>The 206 Owner's Manual has instructions on how to make constant radius moldings. It starts on page 29 of the PDF.

For elliptical moldings, there's an add-on part covered in its own manual.

Hope those help. I don't have a W&H, but I've admired them from afar for a long time. :-)

Re: Williams and Hussey Moulder

#4

Re: Williams and Hussey Moulder

Keith Newton

>I would like to have one also, but for two radiused edges, why not just use a router.

I think on the W&H you affix the wood to a template underneath, that rides between guide pins as it feeds it through the cutter.

Re: Williams and Hussey Moulder

#5

Re: Williams and Hussey Moulder

Kirk D.

>Could you just use a round over bit in a router to radius the edge. Results will be just fine with a major savings.

Re: Williams and Hussey Moulder

#6

I have one

Rob Sandow

>I've never used it to make radiused mouldings, but they sell an attachment that does the job for any arbitrary radius. For a fixed radius, all you need to do is make a simple guide out of a couple pieces of plywood set with the correct radius and you can run them through. This is truly a magnificent machine. It makes super smooth cuts up to 3/4" deep in one pass with only 2 cutters. I was amazed the first time I used mine.

If you are patient and look around, you can get them on the used market for $1000 or so. That's what I paid for mine about 5 years ago.

Rob

Re: Williams and Hussey Moulder

#7

Re: Williams and Hussey Moulder

Wess in NJ

>I have a W&H moulder and have made lots of radius and elliptical casings with it. It is a great machine. However, if your casing is really just flat stock with a radius on both sides, the moulder won't really help you. Make your blank and run a router along both sides, that's how I would go about it even with the moulder in the shop.